Fuel shutoff valve connection to cable

[taylorukuk]

Mark - It is a finger strainer in the tank (on the 90 degree fitting)

[taylorukuk]

[Mark Bowden]

Thanks, just wanted to see you had one. It didn't look like the replacement ones you can get here in the states.

[Ragwing nut]

Ragwing nut, I sent a pm with my address. Thanks!!!

I got it, and I'm digging one out

[astjp2]

65hp was 3/8” npt male to 1/4” npt female, and the need to be drilled out all the way to the bottom, the brass fittings are only drilled part way, I also ream them to clear the screen for more flow at higher aoa, I use a ball end mill to get a good finish…