Mark Bowden
Taylorcrafter
Last Activity: 1 day ago
Joined: 07-16-2015
Location: United States
-
Glad you found it James. Thanks for reporting back. Happy flying, fly her often! -
Sam, welcome and glad you are finding a Taylorcraft. Walnut Grove is a little bit from Kansas City but our Vintage Chapter 16 would welcome you to become a member. There are a number of Tcraft owners and a mountain of Vintage knowledge. https://chapters.eaa.org/vin16
I have ~850 hours...Leave a comment:
-
Chris, did you give them the engineering drawings I posted a long time ago that I had made of the wire? I also have the ProE file as well.Leave a comment:
-
Tcrafters, to requote Forrest above, don't yank and lift on the outboard wings. You will over stress the wing past what it was designed for. You are using a 18 foot lever on a 750 lb object, it will move and move a lot.
If you need to rock the aircraft only do so at the outboard strut to...Leave a comment:
-
Aircraft Spruce has them in the catalog. I cannot verify if they will work with the stem holes in Shinn wheels.Leave a comment:
-
Buyer beware, those outer halves are serverly dented. If they are not cracked (might be albe to weld them) you need to ensure that the dents have not created a bent outer face. If the outer face which has the wheel bearing race is not parallel to the inner face the bearings will be mis-aligned.
...Leave a comment:
No activity results to display
Leave a comment: