Bungees?

[astjp2]

Is it about time for another group buy for bungees?

[Robert Lees]

Indeed. I've just last month replaced my last supply of 9010 and 9010HD pairs (courtesy of Helen of this parish) so I will be needing more stock for the future.

Rob

[Tshoney2]

Hey guys I’m in Illinois. Was wondering if anyone had a bungee tool I could rent? Getting my F19 read for its 1st flight in over 20 years. The bungees are the last thing to install.

[astjp2]

When Valerie is done with my loaner, she can send it to you...or I can find my other one, you just pay shipping both ways. Tim

[Hank Jarrett]

I also have one I can send out, same deal. Had two people who wanted to borrow mine but never got an address for them. If I am closer I am in the very SE corner of Virginia.

Hank

[3Dreaming]

Hey guys I’m in Illinois. Was wondering if anyone had a bungee tool I could rent? Getting my F19 read for its 1st flight in over 20 years. The bungees are the last thing to install.

Where are you located?

[Rigdon66]

I live 3miles from Dubuque IA… if you are close and want to fly up and land at Rigdon PVT you can just walk across the road and grab mine

[Ernest Golper]

Count me in on the group buy for bungees

[Tshoney2]

Rigdon66 i sent you privat message. I live by Rockford il.

[Tshoney2]

Thanks for all the help.

[Kerbs]

I am interested in bungies as well.

[cbcfly]

I would like some bungees too

[8708]

I would be interested in bungees too.

[Laz]

I would like to be included in the group buy please.

[otrcman]

Will need them for my L2-B

The L-2(DCO) series airplanes don't use the same bungees as the side-by-side airplanes. To make the subject even more difficult, the bungee size listed in the various supplier catalogs (Aircraft Spruce, Wag Aero, etc) aren't a good fit and aren't the same as what is shown on the L-2 factory drawings.

The Army parts manual for the L-2 doesn't list the bungees as a separate item, so that won't be of any help. I would suggest that you find a set of the L-2 drawings and look at the landing gear assembly sheet. That size will fit, but it was always a bit too tight for my tastes. If Ron Greene is still on this site you should be able to get the part numbers from him.