Needed: Rudder peddle double u shaped steel clamps

[teamscalepilot]

Lost these in the move. If anyone has ever a set of 3 they can part with please let me know.
thanks

[astjp2]

try Ragwing nut for them

[Hank Jarrett]

If he doesn't have them let me know. I can take the set from my 45 and make drawings so you can make your own. Don't forget you need the brass shims with the oil holes too!

Hank

[Ragwing nut]

I have one double, and two singles

[teamscalepilot]

Ok ,let me know how much, thanks [email protected]

[Ragwing nut]

Ok ,let me know how much, thanks [email protected]

$35 shipped

[teamscalepilot]

Ok, will that include the brass shims?
thanks

[3Dreaming]

It is pretty easy to buy brass shim stock and make new shims that are right for your airplane.

[Ragwing nut]

Ok, will that include the brass shims?
thanks

I can include those that I have

[astjp2]

If you are still short, I can look in my collection. I also have a roll of brass shim stock that I can cut to width and you could fit and trim and drill. Tim

[teamscalepilot]

The shims must be flat then?
Ragwing Text me your # at 843-540-1591
Thanks

[astjp2]

no the shims are formed to match the plates. Easy to make though

[teamscalepilot]

What's the thickness of the brass shims?
Thanks

[Robert Lees]

What's the thickness of the brass shims?
Thanks

It depends upon the thickness of what slop/wear/ they have to take up.They come in every thickness from 0.0005" to thicker.

They need fitting according to what is needed (hence the term "fitter" in engineering terms)