engine baffle

[at7615]

Need to make the center baffle that goes between the spider and the cases, anybody got drawings/dimensions or one for sale? Thanks

[Dick Smith]

I don't know if you have seen this link, but it may give you some ideas: https://c-fclr.blogspot.com/p/taylor...d-cowling.html
The distance between the holes that accomodate the two bolts that hold the spider on can give you a scale value that might help in sizing trial patterns. See picture 12 in the series of photos shown in the above-mentioned link.
see the next link and the ones following: https://vb.taylorcraft.org/forum/tay...forms-baffling https://vb.taylorcraft.org/filedata/fetch?id=157538 https://vb.taylorcraft.org/filedata/fetch?id=157468

[Garry Crookham]

Terry Bowden at Certified Aeronautical Products sells drawings of Taylorcraft engine baffles.

[astjp2]

Terry Bowden at Certified Aeronautical Products sells drawings of Taylorcraft engine baffles.

All but the one he needs...

[sully]

Have a set off a C-85

[astjp2]

I would like to make fiberglass molds from yours, they look real nice!

[sully]

They have several patches.

[astjp2]

Still good for a pattern, mine are garbage, just a patchwork of pieces. Tim

[at7615]

Have a set off a C-85

Nice!

[at7615]

I don't know if you have seen this link, but it may give you some ideas: https://c-fclr.blogspot.com/p/taylor...d-cowling.html
The distance between the holes that accomodate the two bolts that hold the spider on can give you a scale value that might help in sizing trial patterns. See picture 12 in the series of photos shown in the above-mentioned link.
see the next link and the ones following: https://vb.taylorcraft.org/forum/tay...forms-baffling https://vb.taylorcraft.org/filedata/fetch?id=157538 https://vb.taylorcraft.org/filedata/fetch?id=157468

Yep, got that link, thought he had the drawings but can't find them

[at7615]

Owner says she's got the baffle, I'll measure and post dimensions, I make lots of parts for the old birds, will ad to my portfolio!

[astjp2]

I also noticed this on a google search

http://flybabyfun.blogspot.com/2016/04/repairing-side-and-rear-engine-baffles.html?m=1