Announcement

**Dick Smith** · 04-15-2021, 23:47

I don't know if you have seen this link, but it may give you some ideas: https://c-fclr.blogspot.com/p/taylor...d-cowling.html
The distance between the holes that accomodate the two bolts that hold the spider on can give you a scale value that might help in sizing trial patterns. See picture 12 in the series of photos shown in the above-mentioned link.
see the next link and the ones following: https://vb.taylorcraft.org/forum/tay...forms-baffling https://vb.taylorcraft.org/filedata/fetch?id=157538 https://vb.taylorcraft.org/filedata/fetch?id=157468

**Garry Crookham** · 04-16-2021, 05:45

Terry Bowden at Certified Aeronautical Products sells drawings of Taylorcraft engine baffles.

**astjp2** · 04-16-2021, 11:59

Originally posted by Garry Crookham View Post

Terry Bowden at Certified Aeronautical Products sells drawings of Taylorcraft engine baffles.

All but the one he needs...

**sully** · 04-16-2021, 12:58

Have a set off a C-85
20210416_125010.jpg

**astjp2** · 04-16-2021, 13:13

I would like to make fiberglass molds from yours, they look real nice!

**sully** · 04-16-2021, 13:33

They have several patches. 20210416_125040.jpg

**astjp2** · 04-16-2021, 15:40

Still good for a pattern, mine are garbage, just a patchwork of pieces. Tim

**at7615** · 04-16-2021, 17:37

Originally posted by sully View Post

Have a set off a C-85
20210416_125010.jpg

Nice!

**at7615** · 04-16-2021, 17:37

Originally posted by Dick Smith View Post

I don't know if you have seen this link, but it may give you some ideas: https://c-fclr.blogspot.com/p/taylor...d-cowling.html
The distance between the holes that accomodate the two bolts that hold the spider on can give you a scale value that might help in sizing trial patterns. See picture 12 in the series of photos shown in the above-mentioned link.
see the next link and the ones following: https://vb.taylorcraft.org/forum/tay...forms-baffling https://vb.taylorcraft.org/filedata/fetch?id=157538 https://vb.taylorcraft.org/filedata/fetch?id=157468

Yep, got that link, thought he had the drawings but can't find them

**at7615** · 04-16-2021, 17:39

Owner says she's got the baffle, I'll measure and post dimensions, I make lots of parts for the old birds, will ad to my portfolio!

**astjp2** · 04-16-2021, 20:41

I also noticed this on a google search

engine baffle