I'm unloading all my parts

[Ragwing nut]

Might you have the trim pieces that attach to edge of sliding side windows (in the middle...felt attached to it).

that should be easy enough to fabricate. I doubt it but will look

[Ragwing nut]

Would you have a Luscombe exhaust ? or A BCD12D nose bowl ?

I don't have any luscombe exhaust. I have a couple nose bowls, but need to look at them for condition

[waltermrich]

Ok thanks

[Rcondren]

Looking for bc12 shinn brake pads or group

[Ragwing nut]

Looking for bc12 shinn brake pads or group

I sold all my shinn parts to one guy couple months ago. Shinn pads are 1" x 1/8" clutch/brake lining.

[waltermrich]

Any action on the cowl ?

[birdlegs]

I'm looking for a bottom windshield cap strip, for a BC12D it screws to the boot cowl, is shaped in a half circle approx. 2 1/2 wide x 42" long
I'll pay for it and shipping. Thank you

[Jim Herpst]

I'm looking for a bottom windshield cap strip, for a BC12D it screws to the boot cowl, is shaped in a half circle approx. 2 1/2 wide x 42" long
I'll pay for it and shipping. Thank you

You are welcome to my old one after I finish fitting up my new one

[Ragwing nut]

I'm looking for a bottom windshield cap strip, for a BC12D it screws to the boot cowl, is shaped in a half circle approx. 2 1/2 wide x 42" long
I'll pay for it and shipping. Thank you

I have a few. Let me see what shape they are in

[slam555]

I just bought a 46 b 12, its missing some of the 1/4 turn latch screws, would like to get around 19 of them 5 or 6 would get me by, also looking for a new or rebuilt or rebuild kit for the wing fuel transfer valve, mine has a small leak
I\m looking for some advice It has a new garmen radio but it won't transmit or receive I believe its a connection for the headset that isn't right, was said to be working before I bought it,
and finally the turn indicator is out, but would like to replace it with a all in one unit, (glass pack) that will fit in the gauge opening.
theres a bunch of stuff to tweak on this one but the pane is a good flyer
ANY help is greatly appreciated, Sam Tillery 501 519 8066

[Ragwing nut]

I just bought a 46 b 12, its missing some of the 1/4 turn latch screws, would like to get around 19 of them 5 or 6 would get me by, also looking for a new or rebuilt or rebuild kit for the wing fuel transfer valve, mine has a small leak
I\m looking for some advice It has a new garmen radio but it won't transmit or receive I believe its a connection for the headset that isn't right, was said to be working before I bought it,
and finally the turn indicator is out, but would like to replace it with a all in one unit, (glass pack) that will fit in the gauge opening.
theres a bunch of stuff to tweak on this one but the pane is a good flyer
ANY help is greatly appreciated, Sam Tillery 501 519 8066

THe quarter turn dzus you can buy from spruce. There isn't any rebuild kits for the fuel valves. They just have one oring in them or a packing. Use some lapping compound on the seat taper. Can't help with the other stuff

[Jim Herpst]

I just bought a 46 b 12, its missing some of the 1/4 turn latch screws, would like to get around 19 of them 5 or 6 would get me by, also looking for a new or rebuilt or rebuild kit for the wing fuel transfer valve, mine has a small leak
I\m looking for some advice It has a new garmen radio but it won't transmit or receive I believe its a connection for the headset that isn't right, was said to be working before I bought it,
and finally the turn indicator is out, but would like to replace it with a all in one unit, (glass pack) that will fit in the gauge opening.
theres a bunch of stuff to tweak on this one but the pane is a good flyer
ANY help is greatly appreciated, Sam Tillery 501 519 8066

See Tim Popp for new fuel valves... He is on this site and others. As far as the radio (not mounted in the panel)...many choices. Really ones wants more than anything.

[slam555]

I'm looking for a working turn indicator, and some of those 1/4 turn fasteners, and a fuel valve for the wing tank Sam 501 519 8066

[Jim Herpst]

I'm looking for a working turn indicator, and some of those 1/4 turn fasteners, and a fuel valve for the wing tank Sam 501 519 8066

You have received (most)the answers to your questions/needs here. What are we missing??

[slam555]

i'M LOOKING FOR THOSE FIBERGLASS COVERS ON THE COWL THEY COVER THE PLUG WIRES, 501 519 8066