Anyone looking for parts?

[Ragwing nut]

Re: Anyone looking for parts?

Do you have a left gear leg?

bc12d or L2

[tracker852]

Re: Anyone looking for parts?

Actually its an F-19. I am hoping a BC12d will work. Would you know? Thanks

[Mark Julicher]

Re: Anyone looking for parts?

F-19 has the straight axle. BC12-D is tapered axle.
But there are probably exceptions to this rule of thumb.

[Ragwing nut]

Re: Anyone looking for parts?

F-19 has the straight axle. BC12-D is tapered axle.
But there are probably exceptions to this rule of thumb.

f-19 is straight axle and used a cleaveland drum brake instead of disc like f-21. I do not have one. sorry.

[Don]

Re: Anyone looking for parts?

I am looking for brake material for my MLG. I have a BC12d. I also need the rivets.
I am also thinking of epoxying them in lieu of riveting the material, but i need more info on
what type epoxy that would work.

My name and phone: Don Hanes phone: 208 610 0338

[Don]

Re: Anyone looking for parts?

I am looking for brake material for my MLG. I have a BC12d. I also need the rivets.
I am also thinking of epoxying them in lieu of riveting the material, but i need more info on
what type epoxy that would work.

My name and phone: Don Hanes phone: 208 610 0338

[Ragwing nut]

Re: Anyone looking for parts?

I am looking for brake material for my MLG. I have a BC12d. I also need the rivets.
I am also thinking of epoxying them in lieu of riveting the material, but i need more info on
what type epoxy that would work.

My name and phone: Don Hanes phone: 208 610 0338

doug combs with the luscombe foundation has brake lining kits

[M Towsley]

Re: Anyone looking for parts?

There has been prior discussions on the use of epoxy with brake linings. Great idea, but not FAA approved. Most epoxies de-laminate with heat. Rob Lees, in England, does this. Makes great sense, using the right epoxy, but just not allowed here.

[crazytcraft]

Reyes : Anyone looking for parts?

I am going to start liquidating all my inventory except for what i need to build 2 airplanes. I have a tons of parts, so ask away. I do not have any struts or nice cowling available. Parts will be reasonably priced, I am also willing to sell all of it in one lump sum if someone wants a deal, would take probably 2 ryder trucks to move it all. I am also looking for a couple things like rudders and a F-21 nose bowl. Once everyone here has had a shot i will start listing on ebay.

yes im looking for wheels and brakes and a tail wheel and a instrament panel any help would be great .

[Hank Jarrett]

Re: Reyes : Anyone looking for parts?

Mike, did you ever see any of those 41 exterior door handles? I have started shaping a skin to match the outside of one from aluminum. If I can tap out a new handle skin I will try to make a duplicate. I wonder how they made that outer skin originally. I will bet you they didn't hand tap it from an aluminum sheet! The hand made on is on the bottom. Needs some more work.

Hank

[Hank Jarrett]

Re: Reyes : Anyone looking for parts?

Try to post the photo one more time. #(&%@#(*&@!!

Hank

[Ragwing nut]

Re: Reyes : Anyone looking for parts?

outer handle is stainless. I know I have one, I just have to find it.

[Hank Jarrett]

Re: Reyes : Anyone looking for parts?

There was NO WAY I was going to try and tap this from SS! I figured if I could make the outer skin from Aluminum I might give it a try. I can cast a new core if I can make a decent skin, but a replacement is the real solution. I just can't resist seeing if I can reproduce old technologies. I think the original skin was probably stamped then deep drawn. Probably a pot metal core and the flange edges were pressed down to hold it together. I would really like to X-Ray it and see if it is just a square steel shaft with a 90* bend in the handle.

Hank

[Ragwing nut]

Re: Reyes : Anyone looking for parts?

yes im looking for wheels and brakes and a tail wheel and a instrament panel any help would be great .

I have a few intrument panels, doubt I have any good gear or extra wheels.

[Ragwing nut]

Re: Reyes : Anyone looking for parts?

Hank, how long is the shaft? I think they are the same as L-2 with exception to the shaft length.