Announcement

Collapse
No announcement yet.

Need a few aileron ribs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need a few aileron ribs

    Does anyione have a few prewar aileron ribs that they might part with? I need (1) normal full rib and (3) nose ribs. By "normal rib" I mean the full rib with the 7/16" spar opening not the one with the 7/8" spar opening for the doubled area of the center hinge. I was suprised to see that there are differences in rib count on the 1938 ailerons vs. the post-wars.
    MIKE CUSHWAY
    1938 BF50 NC20407
    1940 BC NC27599
    TF#733

  • #2
    Re: Need a few aileron ribs

    Mike,

    I have some nose ribs, not sure if they are pre-war. BTW, how did the step and door handle work out for you?

    Regards,
    Glen Brodeur

    Comment


    • #3
      Re: Need a few aileron ribs

      Glen,

      Just like the wing ribs the prewar aileron ribs were built up rolled stock not stamped.

      Little things must amuse me....I can't bring myself to take the hang tag off that NOS door handle.......complete with it's 90 cent price. I will mount the step when I attach the stuts. Both will work great and I appreciate your parting with them. You don't by chance have another one of those door handles do you?
      MIKE CUSHWAY
      1938 BF50 NC20407
      1940 BC NC27599
      TF#733

      Comment


      • #4
        Re: Need a few aileron ribs

        Mike,

        Hang on to that tag, it's probably worth more than the handle itself. The aileron nose ribs that I have are stamped. You can have them if you want to use them. I do have another door handle. You will have to rework it a little. It is a Dexter handle like you have except that it was used on an access panel for a furnace. You will have to run a die over the stem with the appropriate pitch and then shorten it to the correct length and poof, you have a genuine tcraft door handle! You can copy the inside handle that I sent you. It is correct for pre-war models. I had identical ones on my '40 BC-65. They were chromed and looked pretty snazzy.

        Glen

        Comment


        • #5
          Re: Need a few aileron ribs

          How about posting some pictures of these handles? I am wondering how close mine are to original.
          Hank

          Comment


          • #6
            Re: Need a few aileron ribs

            Hank,

            I will try to remember to take some good pics tonite. Rented the Cub for an hour after work.....guess which one get's priority?
            MIKE CUSHWAY
            1938 BF50 NC20407
            1940 BC NC27599
            TF#733

            Comment


            • #7
              Re: Need a few aileron ribs

              Hank,

              The pic with the green handle is my original 1938 door handle. The others are the NOS handle. Note the hang tag and price!
              Attached Files
              MIKE CUSHWAY
              1938 BF50 NC20407
              1940 BC NC27599
              TF#733

              Comment


              • #8
                Re: Need a few aileron ribs

                I have to find 2 door handles myself

                Comment

                Working...
                X