If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Set up with Acurion 20 miles west of Alliance. near the CAK Airport . I take them in batches from my shop at 2D1. still working on volume pricing.
e-mail direct or call
Will there be a fly-in this year at 2D1? Maybe an arrangement can be made to have a group testing done at the field for those who wait or those who replace and want their old struts tested to make available to others??
Does anyone have a recommendation for who and where to get struts x-ray performed and what the cost is? {near Pittsburgh, PA}
Hank Wehrli
Hank,
There is a guy at Hawkins county,Tennessee who is doing x-rays with faa approval. He charges $50 an hour if you bring the struts to him at his shop, but if he has to come to the airport and do it he has a 4 hour charge minimum and it only takes him about an hour to do it. If you fly into Hawkins County he can come out and x-ray your strut attach also at no extra charge. It may not comply with an AD if one is issued but at least you will know what you have.
Comment