Piper aileron hinge bracket P/No 13062-00

[Robert Lees]

Piper aileron hinge bracket P/No 13062-00

On behalf a good friend here in the UK I unashamedly I ask for anyone who might have (or know of) the above Piper L4J aileron bracket for sale.
They are not presently available from Univair or Aero Fabricators.

The gent in question was instrumental in the engineering/technical approvals for my BC12D when I did my rebuild, so now I hope I might help in a little way by return.

Rob

[Hank Jarrett]

Do you have or can you get some photos? There are a lot of guys around with piles of parts in our hangars and most of us have a smaller pile of parts that aren't Taylorcraft but we just KNOW someone somewhere will need them. Guys like me are pack-rats and no telling if we have a Piper part or not, but I will sure look (I will also check with some of the local Piper guys)

Hank

[Robert Lees]

Thanks Hank. I attach a photo. According to my friend:

"The J3 Cub (wooden wing, Frize aileron version) has three aileron brackets. The centre one has a pulley mounting (I have found a new one), but the inner and outer are without the pulley mounting. The part number of the Inner/Outer hinge bracket is 13062-00. The main thing is to ensure that the holes are still round. Mine were badly worn on one wing."



Cub aileron bracket13062-00.png

[Hank Jarrett]

I will be talking to a friend who has restored a few Pipers today and see if he might have one. Will let you know this week if he does.

Hank

[Robert Lees]

Thank you Hank