Announcement

Collapse
No announcement yet.

need used but good 6:00 x 6 tubes.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • need used but good 6:00 x 6 tubes.

    I need to get a couple of projects on wheels and could use some used (dont need airworthy) good tubes that hold air to get the tires to roll....
    so if you have some used 6:00 x 6 tubes I could use 4 of them....

    thanks

    bob.
    Taylorcraft Foundation Forum Administrator (Bob Ollerton)
    [email protected]

  • #2
    Re: need used but good 6:00 x 6 tubes.

    Give me a day or two and I'll see what I have. I always replace the tubes when I change tires.

    Comment


    • #3
      Re: need used but good 6:00 x 6 tubes.

      Even with bicycle patches used tubes and worn out tires are great for roll arounds. Also nice to not worry about getting chemicals, dope, oil or paint etc on the tires while working. My 45 is on dry rotted tires with patched tubes now. They leak less than my air worthy ones! I haven't serviced the non-airworthy one with air in years.

      Hank

      Comment


      • #4
        Re: need used but good 6:00 x 6 tubes.

        I have one pair from the last time I changed tires and tubes that still hold air you are welcome to.
        Last edited by Buell Powell; 04-14-2018, 13:39.
        Buell Powell TF#476
        1941 BC12-65 NC29748
        1946 Fairchild 24 NC81330

        Comment


        • #5
          Re: need used but good 6:00 x 6 tubes.

          I had about 200+ 6.00x6 decent tires I'd give someone if I still have them. Let the new snow pass & I'll see. I was going to paint them yellow to mark the 2 runways here on the farm but never did.
          Eric Richardson
          1938 Taylor-Young
          Model BL NC20426
          "Life's great in my '38"
          & Taylorcoupe N2806W
          TF#634

          Comment


          • #6
            Re: need used but good 6:00 x 6 tubes.

            Big thanks to Buell Powell for sending me a set of tubes so I can get my Taylor-Young A rolling around again!
            Taylorcraft Foundation Forum Administrator (Bob Ollerton)
            [email protected]

            Comment

            Working...
            X