Stabilizer wanted

[Taylorman]

Looking for one BC65 Prewar 3 hinge horizontal stabilizer for my project.
Thank you

Jerry

[Hank Jarrett]

Re: Stabilizer wanted

Starboard or Port? Flipper or tab trim? Where are you? The shipping could be more than the stab!

Hank

Yes, I have some.

[Hank Jarrett]

Re: Stabilizer wanted

YEOW!!! Elk Grove CA!?!?!? Shipping is DEFINITELY the long pole in the tent! Anyone want to carry a stab from South East Virginia to California?

Hank

If I have the right on you can HAVE one, but how do I get it to you?

[Taylorman]

Re: Stabilizer wanted

YEOW!!! Elk Grove CA!?!?!? Shipping is DEFINITELY the long pole in the tent! Anyone want to carry a stab from South East Virginia to California?

Hank

If I have the right on you can HAVE one, but how do I get it to you?

Hank,
Flipper kind, so no trim in the stabilizer. Left or right are the same.59"x28" should be no issue for UPS. Here is a picture of my good one.

[3Dreaming]

Re: Stabilizer wanted

Left or right is the same uncovered. You can make a box out of 1/4" luan and 1x2"s I think it would be able to go USPS or UPS, but you might also check by bus. It's funny if I type in the name Greyh**nd I get a picture of a ho*nd

[Hank Jarrett]

Re: Stabilizer wanted

I have a pile of stabs at the airport (funny how they don't seem to get damaged in accidents, maybe we should mount the seats to them). I will go through them next time out and see if I can dig out a three hinge.

Hank

[Taylorman]

Re: Stabilizer wanted

I have a pile of stabs at the airport (funny how they don't seem to get damaged in accidents, maybe we should mount the seats to them). I will go through them next time out and see if I can dig out a three hinge.

Hank

Many thanks Hank, send me a private message to let me know what you want for it plus S&H

[Taylorman]

Re: Stabilizer wanted

Hank was nice enough to go through is inventory and look for a three hinge stab for me, unfortunatly no luck. He had no three hinge stab. So the search continues. Please let me kow if anyone has one or where I could locate one. Thanks again Hank for your time.

Many thanks Hank, send me a private message to let me know what you want for it plus S&H

[NC36061]

Re: Stabilizer wanted

Jerry,

Here's one on ebay, but his shipping is three times the asking price of the stabilizer. He's got an elevator too...maybe you can contact him and work out some alternative shipping arrangements.

http://www.ebay.com/itm/Unknown-Control-Surface-58-x-26-x-1-Piper-J-3-Aeranca-Champ-Taylor-Craft-/121102654729?pt=Motors_Aviation_Parts_Gear&hash=item1c3247dd09&vxp=mtr

Dave

[Bigdog]

Re: Stabilizer wanted

...You can make a box out of 1/4" luan and 1x2"s I think it would be able to go USPS or UPS, but you might also check by bus. It's ...

You might consider cardboard. When I shipped a metal prop UPS my A&P told me to wrap it in cardboard instead of making a wooden box. Turns out UPS adds a big surcharge for wood boxes. Go figure.

[Taylorman]

Re: Stabilizer wanted

Thanks Dave
I just called them and bought both stab and elevator with an adjusted shipping rate that is more in live with reality. Shipping today and I should get them mid next week Fed Ex Ground.
Thanks everyone for the help!!!

Jerry,

Here's one on ebay, but his shipping is three times the asking price of the stabilizer. He's got an elevator too...maybe you can contact him and work out some alternative shipping arrangements.

http://www.ebay.com/itm/Unknown-Control-Surface-58-x-26-x-1-Piper-J-3-Aeranca-Champ-Taylor-Craft-/121102654729?pt=Motors_Aviation_Parts_Gear&hash=item1c3247dd09&vxp=mtr

Dave

[NC36061]

Re: Stabilizer wanted

Glad that worked out Jerry, happy to help!

Dave

[Hank Jarrett]

Re: Stabilizer wanted

Same here! Sorry all mine were post war (post war planes must get bent a lot).

Hank