intercylinder_baffles_343

[astjp2]

From the Cessna group but applies to Taylorcraft's also

[PA1195]

Re: intercylinder_baffles_343

Interesting article. I have a C-85 Stroker that was originally installed in a C-140. It has the inter cylinder baffles and gallery trough, but not the tank baffle. For oil cooling I have an F&M oil filter with the Airwolf clamp-on fins seasonally fed by a small blast tube. Seems to work. Whoever added the filter did the engine a favor.

Gary

[Jim Hartley]

Re: intercylinder_baffles_343

Good info, thanks Tim

[astjp2]

Re: intercylinder_baffles_343

I would like to get a tank baffle to make a copy from....so if anyone has one, I would like to borrow it. Tim

[Bravo 6]

Re: intercylinder_baffles_343

Tim,

I just made a bottom baffle for my 85. It's not the prettiest (my first time molding aluminum to a form). Is this what you are looking for?

Greg

[Ragwing nut]

Re: intercylinder_baffles_343

I would like to get a tank baffle to make a copy from....so if anyone has one, I would like to borrow it. Tim

you can buy it new from univair

[astjp2]

Re: intercylinder_baffles_343

Uhm, nope, they don't carry it and Cessna has not made one since 2006, I did a search and there was 1 for sale in Canada, I bought it. Tim

[Ragwing nut]

Re: intercylinder_baffles_343

Uhm, nope, they don't carry it and Cessna has not made one since 2006, I did a search and there was 1 for sale in Canada, I bought it. Tim

is it not the same one that is used on the ercoupe?