Tweet
Anyone got any video or instructions using taylorcraft tool to changeout gear shock cords??
-
-
We need at least two SMALL people to do a film. Small Taylorcrafters are very rare! If you have a 5 year old who does good video production he will be made famous by our group. When you are changing bungees it is REALLY hard to even get good photos!
Hank
-
Especially when I use a bumper jack and a web sling...N29787
'41 BC12-65Comment
-
Tim, I brought my tool home last night. I think you have one guy who needs one and I have a guy in Main and one in Florida. Do you have any time lines that are critical on your guy? I will check the other two and we can get the tools out to the guys with the earliest requirements.
If we do it right the forst guy done can daisy chain the tool to the thrid guy and get all three done the quickest.
HankComment
-
I have 3 that are in line... should be done just after the 4th of JulyN29787
'41 BC12-65Comment
-
Let's keep in contact with where our tools are. We can change the direction of the daisy chain and maybe get the last guy in line flying a bit sooner.
Comment
-
Dave Rude supplied written instructions with his bungee tool. I probably have them but it's his work and permission should be granted. I bet there's a thread here that describes the procedure. Do a search: Drude bungee tool
GaryN36007 1941 BF12-65 STC'd as BC12D-4-85Comment
-
Gary, Dave gave me the tooling to build the bungee tools. I just have not had a major calling for them till recently so maybe i need to tool up to build some...N29787
'41 BC12-65Comment
-
Click on it to enlarge
Last edited by PA1195; 06-09-2021, 13:51.N36007 1941 BF12-65 STC'd as BC12D-4-85Comment
-
Thank you very muchComment
-
My tool is back home here in SE Virginia. Who needed one in the eastern US? Can't remember who needed it next.
HankComment
-
I went ahead and bought one. ThanksComment
Comment