Duane Cole Clipped Wing Taylorcraft Plans FREE

[N96337]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Eric,
Did you get my email?
Thanks!
John

[rammon3]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Eric, Check that email again.
It's not rammon3-, it's rammon_3. A minus sign will not work. you have to use the underscore. Also, it's @comcast.net , not .com.

[Acroeric]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hey John- I didn't get an email. . . . . . might want to resend it? Hope all is good in MT. Gotta be cooler than here!

[Mark Julicher]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

I did not get an e-mail either, sorry to say.
m julicher@earthlink .net

but no spaces of course.
Thanks

[Acroeric]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Just went in and resent it to those that said you did not recieve them. Looks like several mail servers are returning it due to the file size. It is about 20 meg. Anyone have enough storage space on a server to upload them there?

[mikerice]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hi Eric-
The Taylorcraft.ORG Resources page should be able to handle the file, just like a big 337 file. However if there is an issue there, I can put it on an Aerolearn server of mine or on Box.net and give you a link to the file. You can PM me or email mrice at aerolearn dot com. Size is not an issue for my email.

[dalijohn]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Eric,
I would like a set too.

[email protected]

Thanks,

[tcartdrv]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hi Eric,
I would also very much like a copy of the plans.
email: [email protected]
Thanks!

[Acroeric]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Ok guys- I should be up to date on emailing plans. If you have requested a set and not recieved them please let me know. Sorry for the delay in sending them to the last few folks- I had not checked the post in several days.

FWIW- I am starting another clipwing build now. I am incorporating all I have learned through the years building and flying these. It has a few of the Cole mods and none of the Swick mods. It is my own design. A couple of the neat features are:

* Extended landing gear- allows proper 3 point attitude
* Pushrod elevator and aileron control system- all on bearings
* New wing design- incorporates (2) 10 gallon fuel tanks, wood ribs, spars, and leading edges
* New aileron design- 30% hinge line and increased chord and span, all aluminum
* Jettisionable doors
* New tailwheel mount for rod style tailwheel spring
* Horizontal stabilizer mod- moved forward and reshaped to allow for more rudder deflection, more elevator authority
* Vertical stab mod- shortened
* Rudder mod- aerodynamically balanced for more control authority and lighter forces, squared off and Pitts style strap hinges
* Elevator mod- squared off, shorter span and aerodynamically balanced, Pitts style strap hinges
* Lycoming IO-360
* Reshaped firewall to properly fair fuselage between door posts and nosebowl.
* It will be LSA legal and single seat.

If anyone wants to jump in and build one let me know. It sure does get easier/ cheaper when you have the ability to make a few parts vs. just one.

[Robert Lees]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hi Eric, I never received your email. I'll PM you with an alternate emaill address.

Rob

[Acroeric]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hey Rob- Let me know if you got them. I sent them to your alternate email address. I put lots of postage on it this time
E

[Trevor11ac]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Eric I would really appriciate a set. I am very interested in building a clip t. Got a ride in one last year and really enjoyed it(Erik Edgren's). If any one knows of any parts or projects near Wisconsin I would appriciate it. Not sure what mods I want. Would like to do basic acro. Any opinions are appriciated. Thank you so much for your work on the clip T's Trevor [email protected]

[Frank Crenshaw]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hello Eric,

I too am interested in the t-craft plans. Here's my email: [email protected]

Thanks a lot,

Frank

[guns68]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Hi Eric,
I would like a set as well. I can be reached at either [email protected] or [email protected]

Thank you very much!

W. Leroy Skinner

[Acroeric]

Re: Duane Cole Clipped Wing Taylorcraft Plans FREE

Ok- I think I am all caught up! Hoep you guys enjoy.