Fuel shut-off valve

[astjp2]

Re: Fuel shut-off valve

That is a special thread, Mil spec. You wont find anythink in any local hardware store....Tim

[Hal]

Re: Fuel shut-off valve

Smooth move Hal.

Thanks for the part number, likely I will need one. Seems you have solved a problem for me, even before I knew the problem existed. LOL

Did the Hilborn tech say what the weird threads are? Just curious.

Darryl

I did not ask what the threads were. I took the fitting to my local Lowes aviation and could not identify them. It seemed like 1/2 inch was the right diameter but it did not match any thread pitch they had.
Hal

[flyguy]

Re: Fuel shut-off valve

Smooth move Hal.

Thanks for the part number, likely I will need one. Seems you have solved a problem for me, even before I knew the problem existed. LOL

Did the Hilborn tech say what the weird threads are? Just curious.

Darryl

[Hal]

Re: Fuel shut-off valve

Hal, why reinvent the wheel?

What do you mean? Am I missing something? I needed a valve to mate to my finger screen with an AN6 fitting on the other end.
Hal

[astjp2]

Re: Fuel shut-off valve

Hal, why reinvent the wheel?

[Hal]

Re: Fuel shut-off valve

The Hilborn part number for the fitting is: 13-6BX4
Hal

[Hal]

Re: Fuel shut-off valve

Hi All,
I bought one of these valves from speedway and it operates great. Virtually no friction. The only problem is that the threads on the coupler are some odd straight thread that I have never seen before. The coupler seals to the valve with an o-ring but the open end of the coupler uses the same thread. I needed 1/4 npt to fit into my finger screen. I called Hillborn and talked with a tech support fellow that found a short coupler with 1/4npt on one end and straight o-ring on the other. He said nobody had ordered one in years. I have the part number at home and will post it this evening.
Hal

[cvavon]

Re: Fuel shut-off valve

DC

Also the fuel injection unit is also made for alcohol so the valve will not be hurt by modern auto gas chuck

[flyguy]

Re: Fuel shut-off valve

Turns out that my old valve is just fine now that I have checked it out, but while I have the system apart I am going to go ahead and get one of these and see if I can hook it up. End to end size is very close.

Worth the money just to try out a modern valve; if I can get it to fit in neat and solid.

DC

[Dick Huish]

Re: Fuel shut-off valve

It's called "deep discounts" due to large volume purchases. When I was in business I was a dealer for Cooper Avaition but I bought my hardware fron Dillsburg Avaition for less than I could get it from Cooper Even tho all the material came from Cooper.:clue?:: Dick

[flyguy]

Talking with the guys at Speedway Motors I have been able to find the manufacturer of the sexy shut-off valve that I have mentioned on the forum before. Hilborn fuel systems.

http://www.hilborninjection.com/product.asp?Id=124&CatId=215

Back with the Speedway link in a sec.

http://www.speedwaymotors.com/Fuel-Shut-Off-Valve,318.html

Notice it is more expensive from the Mfgr. Hummmm.

DC