Brake Bellcrank

[Ray36048]

During the cold months here in NY state, I am trying to make soom of the parts that are missing from my project.

I am making the bellcrank between the landing gear V that works the brakes. The shaft appears to be 2 1/4 inches long. But, from some of the pictures I have seen, the bellcrank is not located in the center of the shaft.

Does anyone have some dimensions for this?

[Forrest Barber]

Re: Brake Bellcrank

why not just replace it with a used one?

[Ray36048]

Re: Brake Bellcrank

I have the parts made, just need the measurements so I can weld it up. Can you help?

[Garry Crookham]

Re: Brake Bellcrank

Ray
You are correct...the bellcrank isn't centered on the shaft. I just measured one of my spares, the shaft is 2.260", and extends out the front of the bellcrank .780", and out the rear 1.390".

Garry

[mikeg]

Re: Brake Bellcrank

why not just replace it with a used one?

Anyone have a pair of extras?
Mikeg

[Ray36048]

Re: Brake Bellcrank

Thanks for the info.