Instrument panel placards

[Hank Jarrett]

Re: Instrument panel placards

Bill,
Still have the Oil Temp in that panel? I need one and it looks like a U.S. Gauge bulb oil temp.
Hank

[wmfife]

Re: Instrument panel placards

-- Just checked. They were asking $125.00 apiece but I managed to skate by by buying the entire set for $330.

I do know Univair was selling pretzel-yoke skeletons for a fraction of this at the time. But of course they weren't Taylorcraft originals and these are. And these all have the center balls and factory logo caps intact.

I will accept reasonable offers. One is worse off than the other two.. -may need a spot or two of cyan gel on the ball. (- - Paint optional...)

[wmfife]

Re: Instrument panel placards

Bill,
Still have the Oil Temp in that panel? I need one and it looks like a U.S. Gauge bulb oil temp.
Hank

(*Second try*...Yes -- I HATE computers..!)

Hank - Sad to say it looks like we're fighting over the same parts. The panel in the pic wasn't mine. These are. I only bought what I thought I needed at the time and that included the oil temp. gage w/ bulb & cap. line. . . . And that was before I found my '41. (*Tip*: Double-click, ...then use "Ctrl+" to zoom on these.)

--Just Blind Dumb Luck it had a replacement O.T. gage but still had the original Pressure gage. (...Who knew-?) Her panel was 50% factory original (not counting compass.) -How cool is that?

I DO have a nice-looking oil temp and press. gage set I think is for a Stearman or Waco. Not sure what I was thinking back then. (..But the 8' lines that came with them are waayy too long for a T-Craft-)

[Bird]

Re: Instrument panel placards

I need 2

[wmfife]

Re: Instrument panel placards

I have three. Look them over.
One will require some TLC but first-come = first served.
No reasonable offer refused. I can take some loss but you know how it is.

[wmfife]

Re: Instrument panel placards

..Back on the main subject: I'll probably need another of those wing tank transfer valve placards. I have a L & R tank and the single valve & placard were moved to the lower panel. I'd like to have a separate valve at each tank instead of a common one if that's possible.

Think this is the only placard (other than compass) I still need.

[Hank Jarrett]

Re: Instrument panel placards

Just thought I would let all know that I got another set of logos in, this time with a SET PRICE before I took them. The new ones ran $8 each and I will be posting them on the other thread with some pictures.
The original guys who ordered the compass logos get first shot at those if they still want them.
Sorry this all is taking so long, but that is why I won't accept any money till I have them in my hot little hands.
Hank