Brake Rivet Tool

[Pearson]

Where do you get the tool to squeeze the rivets when replacing the brake linings? Anyone have a picture of the tool?

[M Jones]

Re: Brake Rivet Tool

There are a number of options I suppose. I bought one from Aircraft Spruce at Airventure a few years ago. Here's their link:

http://www.aircraftspruce.com/catalog/topages/brakeliningrivset.php

Deflate the tire for tool clearance and you can leave them on the wheel.

[Carrieve]

Re: Brake Rivet Tool

Just be careful when you countersink the rivet holes. It is real easy to go to deep.

[mulwyk]

Re: Brake Rivet Tool

I'll second that "careful when you countersink" The lining material is very soft. You can actually countersink easily by hand. I used a brad point drill bit. It makes a nice flat bottom countersink. Turning the drill bit by hand and checking the depth often assures you don't go too deep.

[M Jones]

Re: Brake Rivet Tool

Yes, I'll third that also. I used this Dremel Tool, flat cutter in my drill press with a depth stop which worked fine also.

[Pearson]

Re: Brake Rivet Tool

Yea, I like the idea of doing the countersink in the drill press with a stop set up. I will have to go to the big box store and find one of those drill bits. Thanks for the info and the pictures. I will take some pics of my endeavor and share with all. Of course I will probably have more questions before then. I have never had to replace the linings, so it will be a learning experience. I have Rob Lee's write up, complete with pictures so that will help.