Cleaning house again.....

[Ragwing nut]

Re: Cleaning house again.....

Do you have a left wing tank? I'd be very much interested in that.

Jeff

I will see if I have an extra one, I doubt it.

[Ragwing nut]

Re: Cleaning house again.....

I take a "nice" mag switch. Pictures of the different style faces ?
Maule "8a" rudder horns?
Thanks
Ralph

Do you have a pic of the 8a horn?

[Carrieve]

Re: Cleaning house again.....

I will take a set of brake linings.

Carri

[Joel Severinghaus]

Re: Cleaning house again.....

Mike,

Do you have a pair of the interior window frames for the sliding windows, or any of the trim pieces or handles for the plastic window pieces themselves?

Thanks,

[flybikefarm]

Re: Cleaning house again.....

How about a fuel shut off rod with knob for bc12d? George

[email protected]

[jdlowrey]

Re: Cleaning house again.....

Do you have a left wing tank? I'd be very much interested in that.

Jeff

[KewFlyer]

Re: Cleaning house again.....

I don't have any A-7 switches. I have some very nice A-9 switches and the only difference is a battery position. Couple different style of faces $50 each.

No factory rudder horns, very hard to come by, i have a buch for other airplanes though

I will check on the handles, those are in short supply

I take a "nice" mag switch. Pictures of the different style faces ?
Maule "8a" rudder horns?
Thanks
Ralph

[Ragwing nut]

Re: Cleaning house again.....

I would take a set of Shinn brake linings.
Would you have:
1- Mag switch? Price. I got one on Ebay or from someone and it has been just problem after problem.
2- A Maule TW "Model 8 a" rudder horns? how much?
3- Original BC12-D "late edition" casted door handles? I have the metal slot and would rather prefer to have the handles.
Christmas in January !
Thanks
Ralph

I don't have any A-7 switches. I have some very nice A-9 switches and the only difference is a battery position. Couple different style of faces $50 each.

No factory rudder horns, very hard to come by, i have a buch for other airplanes though

I will check on the handles, those are in short supply

[KewFlyer]

Re: Cleaning house again.....

I would take a set of Shinn brake linings.
Would you have:
1- Mag switch? Price. I got one on Ebay or from someone and it has been just problem after problem.
2- A Maule TW "Model 8 a" rudder horns? how much?
3- Original BC12-D "late edition" casted door handles? I have the metal slot and would rather prefer to have the handles.
Christmas in January !
Thanks
Ralph

[Ragwing nut]

Re: Cleaning house again.....

I have a patern and material source for glove boxes if you can't find one. Most guys just make new ones from aluminum because the cardboard stuff is pretty lame but I made mine from the cardboard and like it. If the box gets loose and jams the controls I have seen I can crush the box and keep control (obviously done as a test on the ground using a junk box).
Hank

Something i do have is probably a dozen glove boxes for an early Bonanza. New, aluminum, flocked on inside tan. I have used them in the past, almost a perfect fit. Take $35 each

[Ragwing nut]

Re: Cleaning house again.....

Let me know how much for the exhaust. I may be interested.
Twheels: which ones? Price
Shimm Brakes pads? Price
Instruments: which ones? Prices
Small Items......?
Thanks
Ralph

I have a bunch of non-steerable stuff, some steerable

Brake linings $40 set new with rivets

what instruments looking for

more small stuff than i want to list, just ask for what you are looking for

[Ragwing nut]

Re: Cleaning house again.....

If you have a glove box door let me know.

Craig Bailey
[email protected]
847-302-0017

I have several doors, just need to see what are extra to the panels I have. The trick is handles

[Ragwing nut]

Re: Cleaning house again.....

Let me know what you'd want for a rudder, 2 horizontal stabs, and 2 elevators for a BC12 if you have them. The owner of the one I work on would like me to recover his, but doesn't want the down time and is willing to buy a spare set and just swap them when done. Let me know what you have and how much and I'll see if he approves.

Since you did not say BC12-D I assume '41 BC12 Dleuxe?

[Hank Jarrett]

Re: Cleaning house again.....

I have a patern and material source for glove boxes if you can't find one. Most guys just make new ones from aluminum because the cardboard stuff is pretty lame but I made mine from the cardboard and like it. If the box gets loose and jams the controls I have seen I can crush the box and keep control (obviously done as a test on the ground using a junk box).
Hank

[Craig Bailey]

Re: Cleaning house again.....

If you have a glove box door let me know.

Craig Bailey
[email protected]
847-302-0017