Landing Gear for BC 12D

[sapr26]

I am in need of a left landing gear leg for a 1946 BC 12D. Any information you have will be greatly appreciated.

[lfries]

Re: Landing Gear for BC 12D

If nothing is available on the forum try an ad in trade a plane.
It worked for me several years ago.

[sapr26]

Re: Landing Gear for BC 12D

I looked on tradeaplane and didn't find one. I read other forums on this page and wonder about building a leg from the good parts I have.

[sapr26]

Re: Landing Gear for BC 12D

Place an AD in tradeaplane for the landing gear. Got it. I miss read what you wrote. My bad. I'll try it thanks.

[Guest]

Re: Landing Gear for BC 12D

I saw this on the forum;


I have a complete set of gear Left and right taper shaft with wheels and brakes that i will be selling.
Tom
316-992-5044


Dave

[tim]

Re: Landing Gear for BC 12D

bob wagsaff has them look his number up under parts and give him a call

[sapr26]

Re: Landing Gear for BC 12D

Thank you for the responses. I'll see what I can do.
N96726

[Acroeric]

Re: Landing Gear for BC 12D

I am in the process of building a new set for my Clipwing (experimental) Any AP that is good at welding should be able to repair your existing gear. I think the materials for my entire new set- including new straight axles and new strut material was about $500. I will have 30-40 hours in them when I am done building this new set. If it were just a repair that should be much less. We have cut out the old tapered axles and replaced lots of tubing before. It takes time but is better than taking a chance on getting crummy gear. If the axles and fittings can be salvaged the rest is easy.

[matsuthunder200]

Re: Landing Gear for BC 12D

I also needed a left gear leg it took me awhile but what i ended up doing is finding the best one and having it repaired.

[Tcart95268]

Re: Landing Gear for BC 12D

I am going to have my gear ultrasounded by a buddy, and cant seem to track down drawings. I need to know the original wall thickness of all the various tubes. Hopefully one of you can tell me?
Thanks,
Brad

[Arnold Wallace]

Re: Landing Gear for BC 12D

Brent, Check your private messages.