Leading Edge

[flybikefarm]

Any one know the lengths of the leading edge on a bc12d? One of my wing has two pieces the other has five! Any help would be appreciated. George

[3Dreaming]

Re: Leading Edge

George, if you don't get an answer tonight I will measure one in the morning. Tom

[flybikefarm]

Re: Leading Edge

Thanks Tom. George

[3Dreaming]

Re: Leading Edge

The wing we have here is done in 3 plus the tip. From root to tip 64 1/4, 57 1/2, and 54 1/2. There is about 1 inch overlap at the seams. Tom

[flybikefarm]

Re: Leading Edge

Thanks tom, That is about what I measured. It was good to see you again at rantoul. Have a good holiday. George

[M Jones]

Re: Leading Edge

The wing we have here is done in 3 plus the tip. From root to tip 64 1/4, 57 1/2, and 54 1/2. There is about 1 inch overlap at the seams. Tom

Tom, is that my wing you're talking about? (Just having a little fun a this rainy day... Happy Thanksgiving)

[1938BF50]

Re: Leading Edge

George,

The following measurements are with tape hooked on wing root rib and to the center of a 1" overlap. I can't verify originality on either wing.

13rib wing: 59 3/4", 91 1/2", 156", 180" (4pc leading edge + wing tip)

15rib wing: 52 1/2", 111", 173 1/2" (3pc leading edge + wing tip)