Tweet
Anyone have the p/n of DZUS Fastners common to a BC12D lower cowling? I just want to avoid ordering the wrong size. . . .
-
Eric Minnis
Bully Aeroplane Works and Airshows
www.bullyaero.com
Clipwing Tcraft x3
Flying is easy- to go up you pull back, to go down you pull back a little farther. -
Re: Dzus Fastners
AJ5-40 is the most common, although on some I used -45 as well. -
Re: Dzus Fastners
Rob- What about springs? Thanks!Eric Minnis
Bully Aeroplane Works and Airshows
www.bullyaero.com
Clipwing Tcraft x3
Flying is easy- to go up you pull back, to go down you pull back a little farther.Comment
-
Re: Dzus Fastners
Eric:
I used S5-225SS and S5A-200SS (the 200 and 225 denote the "height" of the spring).
Occasionally, I had to tweak the height to get a satisfactory connection between the fastener & spring.
I also used GA5-312 and GA5-350 aluminium grommets - see the Aircraft Spruce catalogue to determine which is needed for which panel thickness.
Some details of Dzus work on my site here.Comment
Comment