L2 Leadin edge spoilers

[navionics]

I came to a point to decide if the leading edge spoilers go on top of the fabric or installed before covering. Also do not have details for the exact location on the leading edge. Trying to take advantage of the Florida's dry weather for covering wile working the last details. Any input would be welcome.(;f

Nick Popovski L2M

[Ragwing nut]

Re: L2 Leadin edge spoilers

If you are referring to the triangle piece of wood about 10 inches long on the leading edge it goes on before cover.

Mike

[navionics]

Re: L2 Leading edge spoilers

Thanks Mike. Do you have any specifics on the location?

Nick L2M

[Ragwing nut]

Re: L2 Leadin edge spoilers

Yes but I can't post them until later tonight or tommorrow. I will need to go to the shop and measure.

Mike

[Pro from Dover]

Re: L2 Leading edge spoilers

Nick,

For proper size of spoiler strip refer to D-8046

For spanwise placement refer to D-(A)8268
Your can get it pretty darn close. Make both sides equal measurement.

For vertical placement on nose radius refer to D-L831
Enlarge the drawng to full size and hold the template against the wing leading edge

All of the drawings are available on the website.

Remember that the spoiler strip is intended to rumble the root end of the ailerone to advise of an impending stall... No rocket science here...

V/R,

Bill

Vintage Aircraft Services

[navionics]

Re: L2 Leadin edge spoilers

Thanks again Bill

I should be able to find those drawing in my L2 CD collection.

Nick L2M