News from the Factory III

[hangarb7]

Re: News from the Factory III

Vic,

What are Ring Cap Fairings?

BTW, GREAT color on that T!

Let us know when you receive your order from Taylorcraft.

Thanks,

Jack Dernorsek
N44057

[Victor White]

Re: News from the Factory III

I called the parts department (800-217-1399) on 5/8/2007 and ordered two ring cap fairings,and they accepted a credit card as payment. I found the number buried somewhere in the web site (not the Home Page), but I,can't seem to find it now.


Vic White

[M Towsley]

Re: News from the Factory III

Mike,

I'm knowledgeable enough to know the difference between a busy signal and a message stating they were out-of-service. After receiving no reply to my e-mail for several days, I decided to call and got the out-of-service message on both phone lines. Since you are championing this latest cause, perhaps you can explain why credit cards are not being taken, though the website states they are accepted???

[mikerice]

Factory Contact Information

The information on the Taylorcraft Factory Contact page is correct and the phones and emails are operational.

As with all new websites, there are potential glitches as the site goes live. The email delivery was erratic Tuesday due to very heavy traffic, and I am sure the few people answering the phones were very busy. There was a lot of interest in the new online catalog.

[hangarb7]

Re: News from the Factory III

Well, if Harry is not in charge, he must have taught them how to do business. Having incorrect information on a new web site and not answering e-mails is insane considering the treatment we have gotten from "Taylorcraft" in the last few years.

I'm tired of waiting and seeing.

Jack Dernorsek
N44057

[M Towsley]

Re: News from the Factory III

Just to check, I called the 866 number and the other number listed for contact. All are no longer working. No answer via e-mail, either.

[Tom Garrick]

Re: News from the Factory III

After I got my airplane back last summer I am still waiting on my $5000 worth of airplane and engine parts he refuses to send me. If he is serious about running a business he will return them or send me the money to replace them. Of course we can get another judgement and pick up what he may still have and hold another sheriffs auction.

Copy that Harry?

Tom Garrick
N82092

I will let the Tribe know if I here from him...

[VictorBravo]

Re: News from the Factory III

But, we should WAIT for clarification.

I think that also means WAIT to send money

If there are legitimate businessmen involved, who are in a position to provide some badly needed credibility, then the first thing they should do is announce their involvement.

If I heard that the owner of XYZ aircraft company is now in charge of making sure Taylorcraft parts are being manufactured and shipped, and XYZ aircraft company was a credible entity, then it would make me far more willing to send a check.

Keeping it a mystery whether the check is being cashed by XYZ aircraft, Harry Ingram, P. T. Barnum, or Jim Bede will certainly not increase the number of orders!

In the meantime, please remember that you can send your busted and bent cowlings to Tim Wood of STL Metal Arts, and have him repair it into show condition... in far less time than it would take to figure out who or what is in charge of Taylorcraft!

[Ed O'Brien]

Re: News from the Factory III

The real power in this deal is some businessmen other than Harry. These folks are honest people trying to get the money Harry owes them. Forrest knows this part of the story, although he's somewhat circumspect about details. I suppose when the time is right -- someone will collect the inside scoop, sort out the details, and tell us. Until then... questions and wondering will persist but without satisfaction, or facts.

SO, I'm not saying we should give Harry another shot. But, we should WAIT for clarification.
With regards; ED OBRIEN

[hangarb7]

Re: News from the Factory III

I'll play Columbo for a minute...

Web site sez factory is still in Brownsville, and same girl answering the phone...

No mention of a new owner, or at least no mention on the web site saying that Harry is no longer the owner (I think a new owner would do that)...

And no response here of Harry not being the owner, so...

Columbo figures that HARRY is still Mr. Taylorcraft. I'm not going down that road again!

Of course, at this point, someone will answer saying that we should give Harry a chance, because it will benefit us all...

Sorry, I couldn't pass on being sarcastic. :ass:

Jack D.

[Len Petterson]

Re: News from the Factory III

If Harry has all the paper work and legaly is the only one what can make parts, is in bankruptcy, and is produssing NO parts.
There does it leave the owners?
LSA or EAA vintage aircraft. Canadain Owner maintinece category.
Here I go again.
The paper burden for an airliner must be less then the one for the Taylorcraft.ops:
Len

[N96337]

Re: News from the Factory III

My first question is, Is Harry still involved??????? If so, thanks but no thanks!!!!!!!!!!!
JH

[barnstmr]

Re: News from the Factory III

I looked up some of the parts. Whats with the rust? How can the FAA allow sales of new PMA parts that are rusted?

[mikerice]

Taylorcraft Factory website

For those who are interested, the new Taylorcraft Aviation website is active.

The website has been under development for months and is a quantum leap from the old printed catalogs in terms of finding parts. More inventory, photos and parts descriptions will be added as the information becomes available.

The FAA-PMA's awarded to Taylorcraft Aviation April 13, 2007 provide the authority to provide OEM parts to Taylorcraft owners.

I built the website for Taylorcraft Aviation, because I want to see the substantial inventory of the factory made available for Taylorcraft aircraft owners. Parts availability increases the value of every Taylorcraft.

[crispy critter]

Re: News from the Factory III

Don't worry Mike....the PMA and/or inspections are the least thing I'm worried about.