Brazing -

[mhorowit]

I'd like to learn how to do light brazing.
I noticed a MAPP gas cylinder and accessories at HomeDepot.
Can I do light brazing (1/16" metal) with that package, or do I need to locates someone with an oxy-actelyne outfit? - Mike

[jCandlish]

Re: Brazing -

You will never regret learning to master a cutting torch, and the increadable flexibility an Oxy-Acetylene rig gives you.

Its also a tool for making tools.

For brazing check out the portable units the HVAC installers use.

[paulp]

Re: Brazing -

Mike,

In order to braze, you will have to have temps in excess of 800 deg F. You can purchase an adequate oxy-acet rig at your local welding supply shop. I use victor gages but you can go with a lesser expensive set and do fine. I would highly recommend you check with your local Vo-Tec. They will generally offer a short course(6-8 wks) which you can complete at night and will give you the basic skills you need. Then, it's just a matter of "burn'n rod" to get your technique down. The Mapp & prestolite gases are for lower temps and soft solder applications. Highly recommend the vo-tech!

Good luck.