Bungee Tool

[skyguy]

I am located in North Carolina, does anyone have a bungee tool I could use? If it has to be shipped I would be glad to pay for that.

Thanks,, Guy

[Hank Jarrett]

Re: Bungee Tool

I have one in VA Beach. Where in NC are you?

Hank

[skyguy]

Re: Bungee Tool

I have one in VA Beach. Where in NC are you?

Hank

I am just outside of Greensboro, NC.

[Hank Jarrett]

Re: Bungee Tool

That's only about 175 miles from here (depending on which airport you are at). Is your plane down or flyable? I am at KSFQ if you want to do it here or I could ship the tool to you.
Do you have someone to help (really is a two person job, if for no other reason than safety).

Hank

[Hank Jarrett]

Re: Bungee Tool

That's only about 175 miles from here (depending on which airport you are at). Is your plane down or flyable? I am at KSFQ if you want to do it here or I could ship the tool to you.
Do you have someone to help (really is a two person job, if for no other reason than safety). It also goes faster (and safer) if at least one person has done it before.

Hank

[skyguy]

Re: Bungee Tool

That's only about 175 miles from here (depending on which airport you are at). Is your plane down or flyable? I am at KSFQ if you want to do it here or I could ship the tool to you.
Do you have someone to help (really is a two person job, if for no other reason than safety). It also goes faster (and safer) if at least one person has done it before.

Hank

Thanks so much Hank. My cords have just gotten weak, I think it would be safe to fly. Give me a call when its a good time for you and we can discuss.

Guy
336-508-2026

[skyguy]

Re: Bungee Tool

Hey Hank, can I give you a call to discuss the bungee cords? Thanks, Guy

[Hank Jarrett]

Re: Bungee Tool

I should be home this afternoon. I am rebuilding a deck. What time is good for you?

Hank

[flylo]

Re: Bungee Tool

If not Acroeric lives very close to you & I'm sure has one.

[Hank Jarrett]

Re: Bungee Tool

Found the tool and it is in my car. Let me know how we can get it to you easiest. I can mail, ship or we can meet at KSFQ, which ever is best for you. Wish I could use this as an excuse to fly to you but I am down for maint right now.

Hank

[skyguy]

Re: Bungee Tool

Found the tool and it is in my car. Let me know how we can get it to you easiest. I can mail, ship or we can meet at KSFQ, which ever is best for you. Wish I could use this as an excuse to fly to you but I am down for maint right now.

Hank

Hank, Iwas afraid you could not find yours. Someone is sending me the tool this week. It was good to talk to you and thanks for looking. Guy

[Hank Jarrett]

Re: Bungee Tool

Not a problem. I needed to find it and put it with the "critical but not needed often" tools. It was on a shelf in the hangar and I lucked out and saw it. I need a shelf for things like mag timing tools, wing twist fixtures and bungee tools. You know, the stuff you use once every few years and can never find when you need it. ;-)
Just be sure you have help when you change yours and be careful. If the one you are borrowing has the instructions with it let me know. We need to post them to the group since I think most are like me and have lost them. What we REALLY need is for someone to do a video of the process for the guys who have never done it before. Like I said before, it is a snap after you have done it once.

Be careful

Hank

[woodmw]

Re: Bungee Tool

David posted his instructions earlier this year:

http://vb.taylorcraft.org/showthread.php?12178-Want-to-Buy-Bungee-Cord-Tool/page2

Post #17

And Marty also, Post #19


And David's disapproval of a video being posted.

[Hank Jarrett]

Re: Bungee Tool

Thanks for the link. Now I remember that discussion. A good example of the legal system causing a less safe condition!

Hank

Sure can't blame Dave though. It is still a super tool that works great.