Bulk order of Bungees, put your order in here (was: Bungee Question)

[Garry Crookham]

Re: Bungee Question

Put me down for 4 9010hd's.

Garry Crookham

[flybikefarm]

Re: Bungee Question

I will take 4 9010 hd's. George

[Laz]

Re: Bungee Question

Hank I will take 4 of the 9010HD's for my BC12-D. Please put me on the listh

Mike Lazarowicz
4910 E. cliff Road
Port Clinton, OH 43452

419-573-5043

[ray2njy1]

Re: Bungee Question

Hank,
I would like (4) of the 9010HD's also. Thanks.

I have lost the payment in this thread someone please advise.

Richard Young
N44342 1946 BC12D

[mike lutz]

Re: Bungee Question

Hank,I will take eight,(yes 8) of the 9090 for pre-war,if that will help.

[c tudor]

Re: Bungee Question

Hank,
I'm sure you are right.
Trouble is they just appear too long, so they let the gear legs splay more before they take up the tension.
At that point they work fine, but the wheels are further apart.
I could put the 9010's on without the tool, but not the 9090's.

Maybe it doesn't matter, but it feels crisper on 9090's to me.

Chris.

[Hank Jarrett]

Re: Bungee Question

OK, that is a little troubling. I would have expected the 9010HD cords to be STIFFER than the 9090s!
Hank

It does look like we may have enough of the pre war planes to get the first price break. Not as good as for 50, but it is something.

[c tudor]

Re: Bungee Question

I have a '41 BC12 in the UK.
It waddles like a pregnant duck on 9010's, but sits up straight on 9090's.
Shame we can't get 9090HD's though.

Chris T.

[Av8or7]

Re: Bungee Question

Add me to the list Hank. I would rather have 9010HD and 1110 's but will take what I can get.

Thanks

[Hank Jarrett]

Re: Bungee Question

Looks like we have enough of the 9010HDs asked for to get over 50 and some people have chimed in that they are OK for the pre-war planes too (but just opinions so far, nothing from a quotable source). We actually have 6 pre-war planes (24 bungees) on top of the post war orders.

I think we will run this till this weekend and I will get with Chuck to be sure we don't have any duplicates on our lists. After that we will need checks from those who want bungees so we can pay for them (and to get us the mailing addresses to send them to!) We should be able to put the order in on Monday.

If you want a set and haven't let us know, you are running out of time!

Hank

Next we need to finally establish the regional Taylorcraft lists so we can get together asd groups to put them on. Chuck and I have been looking at ways to meet up and do them production line style. It would be a fun reason to get together and we could probably do 8 or 10 in a short day.

[Ron Coleman]

Re: Bungee Question

Make mine 4 @ 9010HD also. I'm old and slow so please give concise instructions for payment ( by check in my case ).
I appreciate your help.
Thanks!
RonC

[wlas]

Re: Bungee Question

I would like 4 9010's also

[LostnSpace]

Re: Bungee Question

Please add me for (4) 9010HD's, thank you, gary

[Ragwing nut]

Re: Bungee Question

The 9010HD will work on prewars, just not the early ones with the narrow attach points. 9090 has a lower load test rating and will not support the heavier postwar airplanes with higher gross weight.

[Dick Smith]

Re: Bungee Question

Put me down for 4(four) 9010HD bungee cords. Thanks, Dick Smith