Announcement

Collapse
No announcement yet.

Hangar cleaning sale

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Hangar cleaning sale

    Moving everything from my home shop to my new hangar. . . . .lots of stuff I do not need and will never use. Here is the list- hope it goes to folks that can use it!

    Qty Desc Price ea.
    2 L/H prewar aileron center actuation hinge $25
    2 Landing gear upper fairings NOS $15 sold
    2 BC12D floor/side door fairings NOs $15 sold
    1 Set of BC12D Tailbrace wires and fittings $45 sold
    1 Rudder horn, primed and painted $25
    1 R/S front spar to fuse fitting NOS $20
    3 Aileron pushrod assy cleaned and primed $10
    3 BC12D door handles, cleaned and primed $10 1 sold, 2 left
    4 Jury strut wing attach fittings like new $35 sold
    2 NOS Rear Struts, not sealed but new $100 sold
    1 NOS Maule tailwheel missing tire $100
    1 BC12D glareshield $5
    4 NOS Prewar lower tailbrace wires (wire only) $10 sold
    2 Wing compression struts, primed $15
    1 2 1/4" G Meter works great $75 sold
    1 Set of BC12D used spars- good condition $100

    I'm sure there will be more as I move everything over. I am looking for a nice set of steps for a BC12-D for a friend if anyone has a spare set!

    Eric
    [email protected]
    Last edited by Acroeric; 07-22-2010, 17:46. Reason: manage items sold again, and again
    Eric Minnis
    Bully Aeroplane Works and Airshows
    www.bullyaero.com
    Clipwing Tcraft x3


    Flying is easy- to go up you pull back, to go down you pull back a little farther.

  • #2
    Re: Hangar cleaning sale

    Hi Eric. I'll take the BC-12D tail brace wire set. Thanks, Dick
    TF #10

    Comment


    • #3
      Re: Hangar cleaning sale

      Which style door handle. I need one early 46. George
      TF# 702 Don't be afraid to try something new. Remember amatuers built the ark, professionals built the titanic!

      Comment


      • #4
        Re: Hangar cleaning sale

        Dick- you got it. . . .they are in pretty good shape- you will want to clean them up good and look at them. If you don't like them I'll refund your $$.

        George- the door handles are the magnesium standard handle that is on every post war airplane I have ever seen. These are really nice- I cleaned them up good and primed them. They are ready for your paint color.
        Eric Minnis
        Bully Aeroplane Works and Airshows
        www.bullyaero.com
        Clipwing Tcraft x3


        Flying is easy- to go up you pull back, to go down you pull back a little farther.

        Comment


        • #5
          Re: Hangar cleaning sale

          Hi Eric,

          I would like to buy the 2 Landing gear upper fairings NOS, and the 4 NOS Prewar lower tailbrace wires. I'll send you payment however you like, just let me know.

          Thanks!
          Mike
          NC29624
          1940 BC65

          Comment


          • #6
            Re: Hangar cleaning sale

            Mike- they are yours. Send me your email address and I will forward my address. Thanks-
            Eric
            Eric Minnis
            Bully Aeroplane Works and Airshows
            www.bullyaero.com
            Clipwing Tcraft x3


            Flying is easy- to go up you pull back, to go down you pull back a little farther.

            Comment


            • #7
              Re: Hangar cleaning sale

              Eric, just sent you a PM with my email address. Thanks!
              Mike
              NC29624
              1940 BC65

              Comment


              • #8
                Re: Hangar cleaning sale

                Eric, are the floor, side door fairings sold and do you have a right and left. If they are not sold I will take them.
                Brad

                Comment


                • #9
                  Re: Hangar cleaning sale

                  Rick,

                  I will take the rear struts.
                  MIKE CUSHWAY
                  1938 BF50 NC20407
                  1940 BC NC27599
                  TF#733

                  Comment


                  • #10
                    Re: Hangar cleaning sale

                    Brad- you got them- the door/floor fairings
                    Mike- you got them- the rear struts

                    That was easy
                    E
                    Eric Minnis
                    Bully Aeroplane Works and Airshows
                    www.bullyaero.com
                    Clipwing Tcraft x3


                    Flying is easy- to go up you pull back, to go down you pull back a little farther.

                    Comment


                    • #11
                      Re: Hangar cleaning sale

                      Figured I would edit the list of stuff for sale- here is what is left. I have a Cub in the shop and am looking for lots of parts for it. Trades are welcome!

                      Qty Desc Price ea.
                      2 L/H prewar aileron center actuation hinge $25
                      1 Rudder horn, primed and painted $25
                      1 R/S front spar to fuse fitting NOS $20
                      3 Aileron pushrod assy cleaned and primed $10 Sold all
                      3 BC12D door handles, cleaned and primed $10
                      1 BC12D glareshield $5
                      2 Wing compression struts, primed $15
                      Last edited by Acroeric; 08-11-2010, 07:18. Reason: update items sold
                      Eric Minnis
                      Bully Aeroplane Works and Airshows
                      www.bullyaero.com
                      Clipwing Tcraft x3


                      Flying is easy- to go up you pull back, to go down you pull back a little farther.

                      Comment


                      • #12
                        Re: Hangar cleaning sale

                        If the rudder horn is the original cast steel teardrop I will take it

                        Comment


                        • #13
                          Re: Hangar cleaning sale

                          I'll take two of the Aileron pushrods
                          TF #1030

                          Comment


                          • #14
                            Re: Hangar cleaning sale

                            Mike- Original teardrop? Hmmmm. It came off a 1946 BC12D and it has 3 holes drilled for the AN3 thru bolts, not 2 like my pre war had. Not sure about the teardrop.
                            E
                            Eric Minnis
                            Bully Aeroplane Works and Airshows
                            www.bullyaero.com
                            Clipwing Tcraft x3


                            Flying is easy- to go up you pull back, to go down you pull back a little farther.

                            Comment


                            • #15
                              Re: Hangar cleaning sale

                              Originally posted by Acroeric View Post
                              Mike- Original teardrop? Hmmmm. It came off a 1946 BC12D and it has 3 holes drilled for the AN3 thru bolts, not 2 like my pre war had. Not sure about the teardrop.
                              E
                              i will take a pic of an original for you to compare

                              Comment

                              Working...
                              X