Announcement

Collapse
No announcement yet.

Parts for Sale

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Parts for Sale

    Thought I needed to get this left over stuff in the hands of the guys that need it for their rebuilds. All parts are used, as removed, except as noted.

    1 each BC12D type nose bowl with grills and filter cut out. This item is in pretty good condition. Grills could be made better and it has a small crack that has a riveted repair. $100.00 OBO

    1 each 1940 closed cowl fuselage boot cowl and firewall assembly. This item is in pretty good condition. Does not fit a 1941 fuselage. Pick up in the Indianapolis area. $100.00 OBO.

    1 pair of 1941 wood door window frames. These items are in good condition. Part of the window latch is still installed. $50.00 OBO.

    1941 nose grill castings:
    --1 set (3) raw castings for the closed cowl nose bowl. $75.00 OBO.-SOLD
    --R&L cast grills. One is a raw casting. The other is finished but fingers are broken off. Broken fingers are included and can be welded back on. $45.00 OBO.
    --R&L original cast grills. Both missing the fingers. $30.00 OBO

    1 pair of fabric door frames. No window frames or door hardware. $100.00 OBO.-SOLD

    1 each BC12D rudder frame with tail light fitting. Some light rust. $75.00 OBO.

    NOS R&L Whelen tip light assemblies complete. $75.00 OBO.-SOLD

    1 each "H" B Model control columb (no pulleys, sprokets, shafts or u-joints). $75.00 OBO.

    2 each rear spar to fuselage attach fittings. $20.00 ea. OBO.

    2 each front spar to fuselage attach fittings. $20.00. OBO

    3 pair NOS front spar lift strut attach fittings. $40.00 pr. OBO.

    2 pair front spar lift strut attach fittings. $20.00 pr. OBO.

    1 pair rear spar lift strut attach fittings. $20.00 pr. OBO.

    6 each wing to aileron hanger brackets (square channel). $20.00 each OBO.

    1 each wing to aileron hanger bracket (round tube). $20.00 OBO.

    R&L center wing to aileron hanger bracket with belcrank. $50.00 ea. OBO.

    Wing Compression Tubes:
    --5 each 30 5/16". $20.00 ea. OBO.
    --4 each 30 1/4". $20.00 ea. OBO.
    --1 each 30 3/8". $20.00 OBO.
    --1 each spacer tube between lift strut fittings. $15.00 OBO.

    1 set (8) NOS Auburn SR-88 spark plugs (equiv. to REM40E). $80.00 OBO -SOLD
    1 set of 600X6 Cleveland Wheels and Brakes. Removed from a flying Arizona Ercoupe for non-compliance with the STC. Complete with bearings, spacer tubes, and hub caps. Linings and Discs look good. (p/n 40-59E and 30-59D).
    $350.00 OBO. SOLD
    Last edited by mikeg; 12-30-2009, 13:23.

  • #2
    Re: Parts for Sale

    1941 nose grill castings:
    --1 set (3) raw castings for the closed cowl nose bowl. $75.00 OBO.

    Are these the cast aluminum for a 41 Delux? If so I want them. I will hope they fit my nose bowl.
    Larry
    "I'm from the FAA and we're not happy, until your not happy."

    Comment


    • #3
      Re: Parts for Sale

      Originally posted by Larry Lyons View Post
      1941 nose grill castings:
      --1 set (3) raw castings for the closed cowl nose bowl. $75.00 OBO.

      Are these the cast aluminum for a 41 Delux? If so I want them. I will hope they fit my nose bowl.
      Larry
      Larry,
      These are indeed the grills for the 1941 DeLuxe. We had a bunch cast when I restored my '41 DeLuxe and these are the left overs. They did shrink a little but all I had to do was close the holes up to fit. I did this with the grills installed in the nose bowl using a wedge shape plastic hammer. You will have to file off the casting flash and smooth and polish them. I have done it twice (long story) but it is worth while. Postage will run about $10.00 as I will use the Post Office flat rate box. Let me know what you want to do. PM me a mailing address when you are ready.
      Mike

      Comment


      • #4
        Re: Parts for Sale

        Originally posted by mikeg View Post
        Larry,
        These are indeed the grills for the 1941 DeLuxe. We had a bunch cast when I restored my '41 DeLuxe and these are the left overs. They did shrink a little but all I had to do was close the holes up to fit. I did this with the grills installed in the nose bowl using a wedge shape plastic hammer. You will have to file off the casting flash and smooth and polish them. I have done it twice (long story) but it is worth while. Postage will run about $10.00 as I will use the Post Office flat rate box. Let me know what you want to do. PM me a mailing address when you are ready.
        Mike

        Larry,
        If you want the grills I need a shipping address. PM and I will give you my address.
        Mike

        Comment


        • #5
          Re: Parts for Sale

          pic of the rudder? I am interested. How much to ship to 73093?

          Comment


          • #6
            Re: Parts for Sale

            Originally posted by Ragwing nut View Post
            pic of the rudder? I am interested. How much to ship to 73093?
            Let me work on the pictures and shipping info.
            Mike

            Comment


            • #7
              Re: Parts for Sale

              Originally posted by Ragwing nut View Post
              pic of the rudder? I am interested. How much to ship to 73093?
              Send my your real e-mail address. I can't seem to attach the pictures to this. Send to [email protected]
              Mike

              Comment


              • #8
                Re: Parts for Sale

                What is the difference on the firewall from 40 to 41?

                Comment


                • #9
                  Re: Parts for Sale

                  >1 each BC12D type nose bowl with grills and filter cut out. This item is in pretty good condition. Grills could be made better and it has a small crack that has a riveted repair. $100.00 OBO

                  I am interested in this. Don't need the grills. Maybe someone else needs them.
                  Could you email a picture?
                  Thanks,
                  Hal
                  [email protected]

                  Comment


                  • #10
                    Re: Parts for Sale

                    Originally posted by Bird View Post
                    What is the difference on the firewall from 40 to 41?
                    The closed cowls firewalls are the same. The sheet metal wrap is different due to the shape of windshield.
                    Mike

                    Comment


                    • #11
                      Re: Parts for Sale

                      Originally posted by Hal View Post
                      >1 each BC12D type nose bowl with grills and filter cut out. This item is in pretty good condition. Grills could be made better and it has a small crack that has a riveted repair. $100.00 OBO

                      I am interested in this. Don't need the grills. Maybe someone else needs them.
                      Could you email a picture?
                      Thanks,
                      Hal
                      [email protected]
                      PM me your e-mail address and I will send you pictures. Grills are pretty much a part of the nose bowl as they will probably be damaged trying to remove them.
                      Mike

                      Comment

                      Working...
                      X