Announcement

Collapse
No announcement yet.

A few parts to sell

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A few parts to sell

    Tribe- spent yesterday cleaning out the hangar and have the following for sale.

    1) Complete aileron hinge set L/R for a pre war- this also includes all pushrods (plus 2 extras) , extra hinges, brackets etc. These were completely restored with all new hardware and primed and painted. Also new bushings. $250 for the set

    2) Front spar to fuselage fitting- New old stock- primed in epoxy. $40

    3) Front strut to wing fittings- 3 each, one is NOS, one is really nice, one is as removed and needs to be cleaned and primed. $50 for the set

    4) Ailerons for a clipwing- All ribs cleaned and alodined/ primed. Stock ribs used and could easilly be removed and used for a restoration. Includes new leading edges. $200 for them both- there is enough ribs to build a set of stock ailerons.

    5) Complete set of tail brace wires for a BC12-D. . .. as removed from a flying airplane but need to be inspected, cleaned. $50

    6) NOS Lower tail brace wires for a pre war, I have 4 left. . . . $40 per set of 2

    7) Used but nice bungee covers- alunimum $25

    8) Compression struts, cleaned and primed white $20 each

    9) Set of wing tip lights- look like original from a BC12-D in excellent condition, cleaned and primed with red and green lenses $25 for both

    10) New carburator airbox for Continental engines A65 thru O-200- bought new from ACS and never used. . . ACS P/N 05-01387 costs $218 now, sell for $125

    All prices do not include shipping- E-mail or call if you have any questions.

    Eric
    Eric Minnis
    Bully Aeroplane Works and Airshows
    www.bullyaero.com
    Clipwing Tcraft x3


    Flying is easy- to go up you pull back, to go down you pull back a little farther.

  • #2
    Re: A few parts to sell

    I'l take the bungee covers. george

    [email protected]
    TF# 702 Don't be afraid to try something new. Remember amatuers built the ark, professionals built the titanic!

    Comment


    • #3
      Re: A few parts to sell

      You got 'em

      Here is my address
      Eric Minnis
      3437 NC Hwy 62 North
      Burlington, NC 27217

      Cell- 336-263-8558
      Eric Minnis
      Bully Aeroplane Works and Airshows
      www.bullyaero.com
      Clipwing Tcraft x3


      Flying is easy- to go up you pull back, to go down you pull back a little farther.

      Comment


      • #4
        Re: A few parts to sell

        Eric

        give me a call about the ailerons, I can use them

        206.930.2332
        Jason

        Former BC12D & F19 owner
        TF#689
        TOC

        Comment


        • #5
          Re: A few parts to sell

          if the post war tail wires have no pitting, i will take them

          Comment


          • #6
            Re: A few parts to sell

            Hi Eric
            I would like the air box if it will fit my A 65. I will call you in the morning.
            thanks

            Ron C
            Ron C
            N96995

            Comment


            • #7
              Re: A few parts to sell

              Ron- you got it!

              Mike- I did not see any pitting but they do have some old paint on them.
              E
              Eric Minnis
              Bully Aeroplane Works and Airshows
              www.bullyaero.com
              Clipwing Tcraft x3


              Flying is easy- to go up you pull back, to go down you pull back a little farther.

              Comment


              • #8
                Re: A few parts to sell

                I have a BC12D and would like the wing lites if they are the kind that set into the welded fitting. I am also intersted in the carb air box.

                DO you have a nujmbe I can call? Mine is 419-573-5043.

                I am also looking for a good tight landing gear

                Thanks

                Comment


                • #9
                  Re: A few parts to sell

                  Can you bring them with you next week or do you need to ship them?

                  Comment


                  • #10
                    Re: A few parts to sell

                    Mike- I was going to travel light and not check any bags etc. I'll see if I can get them through security.

                    Laz- I think they will fit your tip bows-they came out of a Tcraft. . . . . carb air box is sold to Ron C- sorry.

                    E
                    Eric Minnis
                    Bully Aeroplane Works and Airshows
                    www.bullyaero.com
                    Clipwing Tcraft x3


                    Flying is easy- to go up you pull back, to go down you pull back a little farther.

                    Comment


                    • #11
                      Re: A few parts to sell

                      Mike- they would not fit in my carry on without bending them up. . . I'll drop them in a tube and send them your way as soon as I get back in town.
                      E
                      Eric Minnis
                      Bully Aeroplane Works and Airshows
                      www.bullyaero.com
                      Clipwing Tcraft x3


                      Flying is easy- to go up you pull back, to go down you pull back a little farther.

                      Comment


                      • #12
                        Re: A few parts to sell

                        All take the nav light if still available. thanks Pat

                        Comment


                        • #13
                          Re: A few parts to sell

                          Pat- I am sorry but I think Laz already sent me a check for them. . . . im going through my mail today- and will be shipping stuff out tomorrow. . . . If he gets them and they are not what he is looking for I'll let you know.
                          E
                          Eric Minnis
                          Bully Aeroplane Works and Airshows
                          www.bullyaero.com
                          Clipwing Tcraft x3


                          Flying is easy- to go up you pull back, to go down you pull back a little farther.

                          Comment


                          • #14
                            Re: A few parts to sell

                            Eric,

                            You are correct I do want the wing lights. However, I only sent you a check for the brake pedals. I am out of the country till November 1.st and will send a check for the lights then. Sorry I screwed this up. Let me know if you need more for the shipping. Send the lights with the pedals if you still can.

                            Laz

                            Comment


                            • #15
                              Re: A few parts to sell

                              Laz- not a problem- I just finished painting the fuselage and finally removed all the masking so I could get to the brake pedals. The lights and the pedals are here when you get back. Hope you have good trip!

                              Painting tail feathers today- I love seeing things get finished!
                              Eric Minnis
                              Bully Aeroplane Works and Airshows
                              www.bullyaero.com
                              Clipwing Tcraft x3


                              Flying is easy- to go up you pull back, to go down you pull back a little farther.

                              Comment

                              Working...
                              X