sold my plane, want good project

[alwaysoar]

After four years of rebuilding my flying project, just as I got it flying beautifully and trouble free, I sold it. At least it will stay on the field. Now I want a good project. Engine/prop not an issue, but the plane must be complete and easily restorable.

Ed@BTV VT
TF527

[Len Petterson]

Re: sold my plane, want good project

CF KZU is for sale 25 CDN I am just finishing the annual.
Wing Fabric 99 and 2001 fuselage in good condition but old no date what I can find, aileron and elevator also unknown
New Slickmags and plugs 80 hr old.
Everting visable are in 7 and 8 condition
Fuselage has several coat of paint. empthy wgt is 833 lbs.
I have owned her for 4 years and a complete fuseage restoration is not appsolutly needed but it would be good time as no serius corrosion is found in her.
You can fly her home. The aircraft is in Niagara Falls Ontario.
Reason for selling: My legs are not going to pass next medical.
Len. 905 562 3197

[VictorBravo]

Re: sold my plane, want good project

After four years of rebuilding my flying project, just as I got it flying beautifully and trouble free, I sold it. At least it will stay on the field. Now I want a good project. Engine/prop not an issue, but the plane must be complete and easily restorable.

Ed@BTV VT
TF527

Look on Barnstormers.com under Antique/Classic > Taylorcraft

There are a couple of nice looking projects. There's even an F series fuselage and an experimental metal wing kit available, you could make a King Kong 180 T-craft bush-whacker out of.

[Arnold Wallace]

Re: sold my plane, want good project

Ed,
I know of a BC12D project available, almost ready to fly. Contact bzzt55athotmaildotcom for information. It has electric.

[crispy critter]

Re: sold my plane, want good project

After four years of rebuilding my flying project, just as I got it flying beautifully and trouble free, I sold it. At least it will stay on the field. Now I want a good project. Engine/prop not an issue, but the plane must be complete and easily restorable.

Ed@BTV VT
TF527

Ed,
I have two,both easy recover projects,both 100% complete,one only has 900 hours total time. Email or PM me for more info.

[high time cub]

Re: sold my plane, want good project

Hi Ed,

Are you looking for a 1-2-3, or 4 seater?

Feist was just at the Flynn in Burlington!

Change in your heart?

http://www.youtube.com/watch?v=p8Z-DIAthbM

Best,
Jim

[Victor Gisclair]

Re: sold my plane, want good project

After four years of rebuilding my flying project, just as I got it flying beautifully and trouble free, I sold it. At least it will stay on the field. Now I want a good project. Engine/prop not an issue, but the plane must be complete and easily restorable.

Ed@BTV VT
TF527

I have one that I want to sell. wings were not taken down yet. Fuseage is repaired ready to blast. Plane is complete with 2 engines. 2 props metal. One engine running , needs exhaust work. Low time. the other engine has bad crank and no mags. Airplane is complete and has everything to rebuild. 1946 BC12D. N95110 $8000 firm. Call for more info. 985 677 1649

[alwaysoar]

Re: sold my plane, want good project

Jim, If I'd known who she was, I would have gone. I'll get the album, just want to start over with a good TCraft project. I like the plane. Flew a Luscomb this weekend, nice plane and fast, but honestly does not handle as nicely as my TCraft.

Kevin, I'll call you soon. Vic as well. Thanks for your postings.

Ed@BTV VT
TF 527

[rotaxflyer]

Re: sold my plane, want good project

Len,

You do know that you can downgrade your license to an Ultralight Permit and fly any airplane (certified or not) with a gross weight of 1200 lbs max and a stall speed below 45 mph. The Medical would then be a Class 4 - Self Declared.

You need to do this before you fail your medical since after that I don't think a self declared will work.

Don't forget about Karl Hiebert - Paraplegic who flew across canada in an Ultralight.

Please don't stop flying.

Andy