Instrument Markings

[Moyie]

I have a BC12-D w/an A65. Could someone please tell me where to place the markings (red, yellow and green) on the Air Speed, RPM, engine temp, and oil pressure gauges. I could not find a reference on the forum.Thanks a lot. Dick

[barnstmr]

Re: Instrument Markings

See the TCDS A696

[M Towsley]

Re: Instrument Markings

Dick,

You can use the search function to find some of this info. Go to this thread for some information that may help you. There is nothing too fancy for a T-Craft regarding this. I understand you may want to see how other people have marked their gauges.

http://vb.taylorcraft.org/showthread.php?t=7397

[Moyie]

Re: Instrument Markings

I did a search in the FAA site , but could not find a TCDS A696 that applied to the BC12D. I saw one for the BF 60. I have not looked up TCDS before so it might just be me. Dick

[Moyie]

Re: Instrument Markings

Marty,
I saw your answer after my post. I can paint on the markings (red, yellow green and white) I just don't the correct values to place the marks. Dick

[M Towsley]

Re: Instrument Markings

Dick,

Look at the pictures in the post as well as some of the comments. You will see what others have done. Look at Joel Severinhaus' photo of his instrument panel You can also obtain the TCDC under the Technical section of this website, Taylorcraft.org

Go to taylorcraft.org, click Technical Resources, under Contents, go down six selections to TCDS and you will find what you need, A-696. Try this link to get to that page: http://taylorcraft.org/resources.html#Type Certificate Data Sheets (TCDS)

[Moyie]

Re: Instrument Markings

Thanks for all the help Marty.