Part number help

[topgun327]

Does Anybody know the Part number for the rear pulley that attaches to the elevator trim tab?

I have a BC12D A65, 1946 taylorcraft.

No one at Aircraft spruce seems to know the answer.

[Robert Lees]

Re: Part number help

Hello topgun327,

Aircraft Spruce don't deal to that level of detail on the Taylorcraft.

Several others will chime in where to get a rear pulley from. May I ask what is wrong with yours? (Worn, missing, turned to dust etc/)

Rob

[lfries]

Re: Part number help

Per an old parts catalog could be B12-461 2" diameter pulley

[Mark Julicher]

Re: Part number help

I have a stack of these pulleys as owner produced. No more front pulleys, just aft.

[topgun327]

Re: Part number help

It's turning to dust. Pieces break off every time I try to align the tab, so I decided to get a replacement.

[M Towsley]

Re: Part number help

Mark's pulleys are the best. Better than original, you won't be disappointed.

[Bravo 6]

Re: Part number help

I have a stack of these pulleys as owner produced. No more front pulleys, just aft.

Mark,

Could I get one of those?

[Mark Julicher]

Re: Part number help

Shall I bring some to Ft Parker?

[Bravo 6]

Re: Part number help

Mark,

I am still waiting for my cylinders to come back. Best case I will have them in time and be able to join you at Fort Parker. Lets plan for that?! If, I can't get the plane flying by then we can figure something else out.

[avenger1949]

Re: Part number help

I have a stack of these pulleys as owner produced. No more front pulleys, just aft.

Just got the annual on my plane done on sat and the rear trim tab pulley is showing signs of wear. Looks to me as if it is a 3 inch pulley and the trim cable is about an 1/8th or so. If this is the pulley you have I would be interested in one myself

Bill Bailey

[Bravo 6]

Re: Part number help

Mark,

I obviously didn't make it to Ft. Parker. I would like to get one of those pulleys from you. I did get my plane back together and flew it last Monday. Looking forward to many trips around Texas visiting other Taylorcrafters!

[Mark Julicher]

Re: Part number help

Yes, I have rear trim pulley as owner produced part.
$15 I pay shipping
PM a snail mail address.

[avenger1949]

Re: Part number help

PM Sent

[avenger1949]

Re: Part number help

Got the part saturday will put the cash in the mail monday thanks a bunch. The pulley on my plane is 3" across will post a picture of it on here after I go the the hangar maybe I am asking for the wrong pulley. Will keep the one you sent because you can't have enough Tcraft parts.

Bill