Announcement

Collapse
No announcement yet.

O-235 weight?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    O-235 weight?

    Hi All,
    Does anyone happen to know the dry weight of an O-235 with no starter or alternator (only mags present)? I have only been able to find the weight with all accessories.
    Thanks,
    Hal
    Tags: None
  • #2
    Re: O-235 weight?

    P.S. I know that not all models of the O-235 weigh the same. I'm just looking for a ballpark figure.

    Comment

    • #3
      Re: O-235 weight?

      Hal- I know what you are thinking- if you are going to go with a Lycoming just use an old straight mount narrow deck 320. There is practically no weight difference between it and the O-235 plus you get something for the weight penalty.

      I would use the O-200 over the O-235 any day. . . . it saves you so much trouble and expense when building. Engine mounts, cowlings, etc. The O-235 delivers practically no additional power and adds significant weight and complexity.

      On my project- going to the IO-320 added at least 6 months work and probably 5k in expense not including the engine cost. For a sport plane you can not beat thet O-200 kept light.
      Eric Minnis
      Bully Aeroplane Works and Airshows
      www.bullyaero.com
      Clipwing Tcraft x3


      Flying is easy- to go up you pull back, to go down you pull back a little farther.

      Comment

      • #4
        Re: O-235 weight?

        You make a great point Eric. I will go with my original plan of using an O-200.
        Thanks,
        Hal

        Comment

        • #5
          Re: O-235 weight?

          Hal- The clipwing will fly fine with any of the 3 engines- I'm just saying that your weight will be so close to that of an O-320 that it would be nice to get something for the weight penalty. There is really nothing any sweeter flyting to me than a light clipwing with a hopped up 0-200. The 320 does awesome but changes the feel significantly.

          You are pretty close to me- stop by anytime to take a look. I will be putting tapes and polybrush on the fuse this weeked at KBUY.
          E
          Eric Minnis
          Bully Aeroplane Works and Airshows
          www.bullyaero.com
          Clipwing Tcraft x3


          Flying is easy- to go up you pull back, to go down you pull back a little farther.

          Comment

          • #6
            Re: O-235 weight?

            Eric,
            I would love to come by and see your airplane. Saturday morning I have a Young Eagles event at Lincolnton that I am coordinating. If you are going to be working on your project around 2:00pm, I can either drive or fly to KBUY if that is ok.
            Thanks,
            Hal

            Comment

            • #7
              Re: O-235 weight?

              I'll be there......just give me a call on the cell.....1st coat of poly brush went on tonight.
              Eric Minnis
              Bully Aeroplane Works and Airshows
              www.bullyaero.com
              Clipwing Tcraft x3


              Flying is easy- to go up you pull back, to go down you pull back a little farther.

              Comment

              Previous template Next
              Working...
              X