Announcement

Collapse
No announcement yet.

Oh! The agony of it all

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oh! The agony of it all

    I can tell that I am going to need to replace the right outboard aileron hinge bracket on my 1946 BC12D. Water has leaked down the cove to the steel bracket that is bolted to the cove where it is corroding the magnesium. My guess at this time is that the last time the wings were recovered someone did not isolate the steel screw or bolt that held the cove bracket in place resulting in the typical corrosion. I anyone has a right outboard aileron hinge bracket that will fit a july 1946 production Bc12D that they can sell to me, I will be happy as a clam.
    I would also like to acquire an unserviceable but complete magnesium bracket.

    Thanks!
    Ron Coleman
    1 575 1168
    Ron C
    N96995

  • #2
    Re: Oh! The agony of it all

    Hi Ron e-mail me direct, again if you did before. I switched servers , I switched Doctors, I switched phone service and a lot is missing . Yes I ahve those brackets... bye
    Taylorcraft Foundation, Inc
    Forrest A Barber 330-495-5447
    TF#1
    www.BarberAircraft.com
    [email protected]

    Comment

    Working...
    X