drawing of overhead cabin tubing

[Rich. Anderson]

My BC12D is at the other end of the state and I need a 337 for tubing repairs. Can someone send a picture or drawing of the top cabin tubing? I can then show the location of the repairs. Thanks

[captjon]

Rich:

Take a look at this photo of the upper cabin tubes---

http://taylorcraft.info/tcraft/cabintubes.jpg

I may have more too on my web page---some 300 plus under "Tami T-Craft's Restoration"

http://taylorcraft.info/tcraft/project.htm

If you need any more let me know.

Cheers,

[Rich. Anderson]

.

Thanks for the pictures, You had a lot more rebuild than I have had to do on mine. Cockpit overhead tubes had pit holes through them. When cut out there was no rust inside the tubes- So must have been some inclusions in the original steel tubing. Holes about 1/16" in diameter.