source for pulleys

[Rex Havis]

Does anyone have a source for the 1 3/4" and 3" pulleys.

[Ron Greene]

Re: source for pulleys

This is on Barnstormers, do a search for "pulley" and it is on page 2.


TAYLORCRAFT PULLEY • $23 • ACCEPTING ORDERS • FAA-PMA 9/30, Ball Bearing style replacement pulley fits Taylorcraft A-228 3.0" and A-229 1.75" • Contact Donna Losey & Doug Combs - CLASSIC AERO located Gilbert, AZ USA • Telephone: 480-650-0883 • Fax: 484-762-6711 • Posted March 9, 2009 • Show all Ads posted by this Advertiser • Recommend This Ad to a Friend • Email Advertiser • Save to Watchlist • Report This Ad • View Larger Pictures

[KewFlyer]

Re: source for pulleys

Rex:
I got mine there. Call Doug. He is very knowledgeble and will help yu choose the ones you need. They sell Luscombe parts.
Good luck
Ralph

[Forrest Barber]

Re: source for pulleys

Talked with Doug at Sun-N-Fun; they put a lot of money up front to get these pulleys approved for Taylorcraft . they are Ralmark, bearings instead of bushings and make your system very smooth . Buy them they are great!

[crispy critter]

Re: source for pulleys

I'll second that. They make for the smoothest flying t-craft you'll ever fly......big difference

[Gary Snell]

Re: source for pulleys

Has anyone confirmed they will fit? I had some old 3" pulleys with ball bearings kicking around and they wouldn't fit in my project because they were too wide for the pulley brackets. Wouldn't mind having some new for my project.

[crispy critter]

Re: source for pulleys

Yes,these will fit. They are made just for t-crafts. In fact I put a thin washer on each side of the pulleys