Whats the general opinion on aerobatics in a T? I dont mean high G maneuvers but things like loops, immelmens, or rolls. Does anybody do that kind of stuff in their T? What bothers me is that the aircraft is over 60 years old but i've read on the board that some people do spin them.
Announcement
Collapse
No announcement yet.
Aerobatics
Collapse
X
-
Re: Aerobatics
Originally posted by FunkyMonkey View PostWhats the general opinion on aerobatics in a T? I dont mean high G maneuvers but things like loops, immelmens, or rolls. Does anybody do that kind of stuff in their T? What bothers me is that the aircraft is over 60 years old but i've read on the board that some people do spin them.
As for doing them in your t-craft...that is a decision only you can feel comfortable with. If you have a t-craft carrying the original spars then you might think twice,however if those spars have been properly cared for,look good ,or have been replace recently then that's still another decision for you to make. Personally if I had a t-craft that the spars looked bad enough that I wouldn't feel comfortable doing any of the things above...then the airplane should be grounded on the spot until the spars could be replaced simply because all of those manuvers mentioned above are 1.5 - 2 "G" manuvers. If your bird won't take that then it's time to park it.Kevin Mays
West Liberty,Ky
Comment
-
Re: Aerobatics
I routinely do light acro in my BC12-D-85. (loops, rolls, spins, hammers, 1/2 cubans etc) and even hope to use it for some airshow work soon ;-) It has original spars but it was totally restored in 1999 and they looked wonderful.
The thing to remember here is that the Tcraft is not the right airplane to learn acro in. It is a great airplane to do the graceful stuff in once you have experience. A loop can be performed at 2.5 - 3 G but if you screw up that can easilly become 4 or more. A roll can also be safely done at 1 g but lots of planes smack the ground when a newbie acro pilot chickens out at the 1/2 roll point and pulls out overspeeding and G'ing the airplane. The roll rate is really slow- it takes total commitment to the roll which is very difficult- especially when you do not pitch up enough on entry.
Like an idiot I taught myself acro (in a clipwing T)- I flew RC airplanes for many years and that probably saved my life- but I still screwed up on occasion. Once I botched a hammerhead and did a tail slide-the stick came out of my hand- how the control surfaces stayed on the airplane is still a mystery but I learned and was albe to live through it.
As always- the recommendation here is to get some training 1st.Eric Minnis
Bully Aeroplane Works and Airshows
www.bullyaero.com
Clipwing Tcraft x3
Flying is easy- to go up you pull back, to go down you pull back a little farther.
Comment
-
Re: Aerobatics
How do you know how many g's your pulling? do you guys have g meters installed?Richard Pearson
N43381
Fort Worth, Texas
Comment
-
Re: Aerobatics
Charles Rooks restored a DC-65 (like mine) and had a video made a while back showing all the maneuvers including 5 turn spins. Haven't heard from him for a while, but his E-Mail used to be [email protected].
Spins, loops and even snap (flick) rolls are no big deal, will impress the passenger and not pull many G's. But then, at age 86, perhaps I've lost some of my daring.
Chet Peek
Comment
Comment