Announcement

Collapse
No announcement yet.

Weather breaks

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Weather breaks

    Finally go three full stop landing in the tcraft, the weather god was good today in the nothcoast Ohio area
    Attached Files

  • #2
    Dan

    Your T-Craft looks mighty fine also. Man the weather has been terrible here also. Maybe Sunday.
    Lee
    Lee
    Cajun Grasshopper

    Comment


    • #3
      Hi Lee

      Thanks and I hope to start putting the green house back on this spring! Dan

      Comment


      • #4
        Dan

        Dan , finally got to fly the t-craft today. Came out of annual, and decent weather, can't get any better than that. I'll take more pictures later. Flew very nice, seems like maybe the AS indicator may be a bit off, don't know. On paper it says I should go about 90 mph. That makes more sense. 45 in pitch prop, turning 2100 RPM's. I'm indicating 110 MPH. So probably need to get that repaired. All else seems to work fine. A lot lighter than the L-2, which is a little heavy on the controls,compaired to the BC-12. I have all T-Craft instruments, so either will repair that or try an find another.

        Dan, it looks very nice inside and out. New interior,glass, headliner,glareshield cover,and baggage. New Maule Tailwheel. Steers really good. I have two 6 gal wing tanks, but one is inop. So that give me 18 gal. Nose tank and one wing tank. Should be good enough until I can repair the busted one or buy another. Just hate screwing up the fabric on the wing.

        Received my hat rack for the Cherokee today. That will be another project later on. For now want to fly the "Yellow Duck" .
        Lee
        Cajun Grasshopper

        Comment


        • #5
          Speeds

          Lee I fly with a couple of Bc12's back here and have a hard time keeping up with them. Put that GPS in there and fly a cross wind course back and forth and you should get a better Idea on the speed. sounds like you got a clipper. Dan

          Comment

          Working...
          X