Bungee tool please

[Darren Lucke]

Re: Bungee tool please

Should've listed my phone numbers, Guys.. sorry -

701.720.3688 or 701.838.1720

Further discounts on group purchase available as well for the list members - mention this please.

CNC is so cool... check a short vid clip too on our site.

Darren Lucke (missing my TCraft on days like today)

https://www.TUFIndustries.com

[Darren Lucke]

Re: Bungee tool please

Hey Guys,
Ran the lathe all day today - losing track of the days, I hear it's Sunday. Nice and Sunny here today, over 70 degrees.

I have more available now.... and here's a link to the pic - sorry, they won't work w/ L2 - but give me a shout / pic private and I'll see what I can do on them.

http://www.tufindustries.com/images/CNC%20Taylorcraft%20Bungee%20Tool.jpg

These tools are TUF AND good looking!

Jim - Your tracking ID FedEx Ground #698659410000286 (fedex.com)

Darren Lucke (just got home at 9:20 p.m. CDT)

Re: Bungee tool please

Or you could buy one of mine for $93, often on ebay, or direct.

Hello

I make them for T-Crafts as quoted here and many other airplanes too, satisfaction guaranteed.

E-mail me or private message me if I can help anyone.

Dave

[jpowell]

Re: Bungee tool please

Darren,
I would like to see the one you said you would send me.

[n6346m]

Re: Bungee tool please

Will this tool also work on an L-2?
Bob

[Darren Lucke]

Re: Bungee tool please

Hey Guys...

I've got some new tools cut on my CNC Plasma I redesigned and they're working out great!

Take a look - check eBay or write me direct.

Just under $100.00 delivered on ebay but if you write me direct I'll shoot them out the door @ $80.00 delivered for the list members - I have 5 on hand right now - ready to ship.

[email protected]

Darren Lucke (former owner of N4417Q - 1986 F21B)

https://www.TUFIndustries.com

[Dick Smith]

Re: Bungee tool

Dan, you can use mine. Check your email. Dick

[Buell Powell]

Re: Bungee tool please

I have one you can borrow too-
Buell Powell

Re: Bungee tool please

Or you could buy one of mine for $93, often on ebay, or direct.

[Carl E. Carson]

Re: Bungee tool please

Also, the Taylorcraft Owner's Club has one they loan out on a "pay the shipping" basis. Contact Bruce Bixler of TOC for details.

Carl

[dedrekon]

Re: Bungee tool please

Dan,
I have the bungee tool that Aircraft Spruce sells. This one:


It works well, I've used it several times on mine and others. You're welcome to borrow it for duplication or just to use for the cost of shipping. Feel free to send smoked salmon anytime!


Vincent

[Dan Mahalak]

AK tribe et al.
Looking to make my very own tool...can i get a pattern from one of you, or perhpas borrow your tool. I promise to return it plus some smokeed alaskan salmon and dried, wild morels! what a bargain!

Dan Mahalak