Announcement

Collapse
No announcement yet.

Shock absorber & rudder arm wanted b-9137

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Shock absorber & rudder arm wanted b-9137

    Hi Every One!
    I'm sure you have a good reply.Ther rubber I buy is neoprene bar to a|c spruce 2"W x 1|2 T & other one 3"W x 3|4" T then the wheel need 90 degree of land so I ask the thicness of material I need ??

    Also I go to the paint & I buy a product epoxy polurethane ENDURA But I miss a part because the part is broken b-9137If a member has a spare part or if the factory is in buseniss anaway all offers i receipt.

    Thank Rob for the service bulletin

    #479
    The time ask many hour above all when your change the locality & you try to paint a a\c in fall season woffffff!!!!

    GOOD SITE
    Luc, C-FJGO

  • #2
    Re: Shock absorber & rudder arm wanted b-9137

    Luc,
    It's hard to understand what you are asking. Is this on the tailwheel?

    Tim
    Tim Hicks
    N96872

    Comment


    • #3
      Re: Shock absorber & rudder arm wanted b-9137

      Hi Tim!
      Now I have installed my shock cord & my thickness of rubber is about .300"
      But I miss one part rudder arm steering is fixed to rudder because is broken
      Luc, C-FJGO

      Comment


      • #4
        Re: Shock absorber & rudder arm wanted b-9137

        I've sold Luc a couple of items......nice earnest chap, but his English is somewhat limited.

        Luc,
        poster une image de la partie que vous parlez de. C'est pour l'engrenage d'atterrissage ou la roue de queue ?


        égards,
        Vincent

        Comment

        Working...
        X