Announcement

Collapse
No announcement yet.

Rubber Gear Bumpers

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Rubber Gear Bumpers

    Does anyone have a good source for the rubber AX handle protectors we commomly use for the landing gear bumpers? I have been everywhere looking-
    Eric Minnis
    Bully Aeroplane Works and Airshows
    www.bullyaero.com
    Clipwing Tcraft x3


    Flying is easy- to go up you pull back, to go down you pull back a little farther.

  • #2
    Re: Rubber Gear Bumpers

    Eric
    I got mine at ACE hardware.
    If you can't find any local let me know and I can pick up some here and send to you.

    Bob Gustafson
    Bob Gustafson
    NC43913
    TF#565

    Comment


    • #3
      Re: Rubber Gear Bumpers

      Eric,

      Although I have not looked specifically for these, we have three ACE Hardware stores in the area. If I'm closer I can pick them up and send them to you, if they have them. Please let me know.
      Cheers,
      Marty


      TF #596
      1946 BC-12D N95258
      Former owner of:
      1946 BC-12D/N95275
      1943 L-2B/N3113S

      Comment


      • #4
        Re: Rubber Gear Bumpers

        I have an ACE here as well. I will go by there after work. If they do not have them I will probably take you guys up on your offer and buy 10 of them!
        Eric Minnis
        Bully Aeroplane Works and Airshows
        www.bullyaero.com
        Clipwing Tcraft x3


        Flying is easy- to go up you pull back, to go down you pull back a little farther.

        Comment


        • #5
          Re: Rubber Gear Bumpers

          OK guys- I went to the 2 local Ace hardware stores here-they did not have any. If anyone has them at your local store please let me know. I would like to buy 4 of them. Thanks-
          Eric Minnis
          Bully Aeroplane Works and Airshows
          www.bullyaero.com
          Clipwing Tcraft x3


          Flying is easy- to go up you pull back, to go down you pull back a little farther.

          Comment


          • #6
            Re: Rubber Gear Bumpers

            I bought some bumpers at an Ace Hardware, but there is a catch ... the bumpers are in the Ace Catalog as a special order item.

            Find a store clerk that knows how to use the catalog. Too many young clerks only know how to work the cash register.

            This is me -- now stuffing a sock in my mouth lest I say more about know-nothing store clerks.
            Best Regards,
            Mark Julicher

            Comment


            • #7
              Re: Rubber Gear Bumpers

              Originally posted by Acroeric
              OK guys- I went to the 2 local Ace hardware stores here-they did not have any. If anyone has them at your local store please let me know. I would like to buy 4 of them. Thanks-
              Maybe you can try the ACE website to order. Here is a link for the bumpers.
              Mike
              NC29624
              1940 BC65

              Comment


              • #8
                Re: Rubber Gear Bumpers

                I called the local Ace Hardware and they have two styles on hand. There are actually four styles, anyone know which model number it is, HS-1, HS-2, HS-3 or HS-4???
                Cheers,
                Marty


                TF #596
                1946 BC-12D N95258
                Former owner of:
                1946 BC-12D/N95275
                1943 L-2B/N3113S

                Comment


                • #9
                  Re: Rubber Gear Bumpers

                  Eric,

                  I found out the correct part number, HS-3, and found one each at two local stores. They checked stock in area stores with no luck. I am going to pick these up for you right now and send them to you. I'm not sure if I still have your address written down. Please send a PM and I will get these two out ASAP.
                  Cheers,
                  Marty


                  TF #596
                  1946 BC-12D N95258
                  Former owner of:
                  1946 BC-12D/N95275
                  1943 L-2B/N3113S

                  Comment


                  • #10
                    Re: Rubber Gear Bumpers

                    Also.....http://lawn-and-garden.hardwarestore...r--685392.aspx

                    Comment


                    • #11
                      Re: Rubber Gear Bumpers

                      Thanks everyone for the help. You guys are great.

                      Marty- Just let me know what I owe you. I will mail order a bunch also.
                      Eric Minnis
                      Bully Aeroplane Works and Airshows
                      www.bullyaero.com
                      Clipwing Tcraft x3


                      Flying is easy- to go up you pull back, to go down you pull back a little farther.

                      Comment


                      • #12
                        Re: Rubber Gear Bumpers

                        They went out Priority Mail this morning and you owe me nothing. You've been a help to me in the past, and I'm sure in the future. It is always a pleasure talking to you.
                        Cheers,
                        Marty


                        TF #596
                        1946 BC-12D N95258
                        Former owner of:
                        1946 BC-12D/N95275
                        1943 L-2B/N3113S

                        Comment

                        Working...
                        X