Wing Struts and Prop

[Pegi Ohlinger]

Not sure if this is the correct forum to post in. However, need prop and left side forward and aft wing struts for Taylorcraft BC12D. Student put me in a ditch. Appreciate any help.

[mhorowit]

Re: Wing Struts and Prop

Pegi, is that you? - Mike

[Guest]

Re: Wing Struts and Prop

Not sure if this is the correct forum to post in. However, need prop and left side forward and aft wing struts for Taylorcraft BC12D. Student put me in a ditch. Appreciate any help.

Pegi,

Try Univair Aircraft for the struts. www.univair.com

Wag-Aero gave me a good price on wooden prop

Old struts may be repairable. I may be interested in them. [email protected] 845-473-0713

Dave

[Frank DeBartolo]

Re: Wing Struts and Prop

I purchased a strut from Univair two years ago and I am happy with it. It is a sealed strut and fits well. It is a little larger (wider than the old struts) but the length and how it attaches is the same as the old strut. We needed to make a new clamp for the Jury strut. I paid $600 for the Univair strut at that time. Don't know if they have gone up in price.

Frank
N43684

[flybikefarm]

Re: Wing Struts and Prop

I have an extra strut that came with some parts I bought. It appears to be good. No rust on outside and does not raddle from rust on inside.. I think the struts are interchangable from side to side. Email me if interested. I am in the field planting corn so may not get right back to you. I also have a complete right wing that needs a rear spare. It would be easy to repair if someone needs a wing. George

[Snatch]

Re: Wing Struts and Prop

I have a set of lift struts and various other parts if you are intrested
My Email is [email protected]

[Forrest Barber]

Re: Wing Struts and Prop

Yes Mike that is Pegi from Front Royal, he gave me the complete lowdown on you
See Pegi how easy that was to use the list...... TRIBE: I talked with Mr. Ohlinger a couple of days ago and mentioned those same sources... thanks for jumping in as always. Forrest

[mhorowit]

Re: Wing Struts and Prop

Yes Mike that is Pegi from Front Royal, he gave me the complete lowdown on you
See Pegi how easy that was to use the list...... TRIBE: I talked with Mr. Ohlinger a couple of days ago and mentioned those same sources... thanks for jumping in as always. Forrest

He was very happy to discover that the gear I had was a left one. Struts would probably be a good first part for the factory to consider manufacturing.

Maybe we could make a list of frequently bent parts (in order of priority) and present it to the factory; there may be other factors, but making parts may be profitable. - Mike