Shinn brake part needed

[r webster]

Is there a source for the Z link rod that connects the belcrank to the horseshoe shaped brake actuator on the Shinn brakes? If not is there information on the best method to fabricate them and the proper material to use?
Ron

[akroflyer]

Re: Shinn brake part needed

Try skybound at 770 466 6797 they have shinn replacement parts

[NJL]

Re: Shinn brake part needed

Might try the calssic aero support at 480-650-0880. I've had an order in at skybound since november and have yet to see. Got a set of brake linings from classic in a week. good luck.

[Guest]

Re: Shinn brake part needed

Is there a source for the Z link rod that connects the belcrank to the horseshoe shaped brake actuator on the Shinn brakes? If not is there information on the best method to fabricate them and the proper material to use?
Ron

I have fabricated them from 3/16" mild steel rod. Double check the 3/16" but that's what I recall. Dave