Announcement

Collapse
No announcement yet.

Edo 1320 floats with T craft rigging

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Edo 1320 floats with T craft rigging

    I've got a BC12-D and floats to fit it. I don't foresee ever putting these floats back on the aircraft because there isn't a suitable place to fly it on floats here in Georgia.
    Thus, is anyone is looking for a set of 1320's with Taylorcraft rigging, I'd just as soon move these down the road. They're located about an hour drive south of Atlanta, GA. They've been hanging up in the ceiling of the hangar for years now and it's time to start cleaning up the place. $5k
    pm me if interested. These are old floats, not new floats. fwiw. They do have the dual water rudders.
    Thanks.

  • #2
    Re: Edo 1320 floats with T craft rigging

    Herman, what condition are they in? Dick
    Last edited by Dick Smith; 06-24-2015, 19:19.
    Dick Smith N5207M TF#159

    Comment


    • #3
      Re: Edo 1320 floats with T craft rigging

      They were being used on the airplane and then removed and stored. They have some patches here and there. I haven't actually laid hands on them even though I own them as they are stored up about 15' in the rafters. They are assembled at present. They were last on the water about 1996 I'm guessing. I know they've been in storage since I arrived on site in 1998. If you have any other questions, feel free to call me at 770-584-9020 between 9am and midnight eastern time. The person that last used them died several years ago so I don't have much more info on them without a fair amount of effort.

      Comment


      • #4
        Re: Edo 1320 floats with T craft rigging

        I do have some pics of the floats (from the bottom) that I could send to someone if they want them. pm me with an email.

        Comment

        Working...
        X