If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
A word of caution on these caps.... Drill a small #50 hole facing aft Ii.e. 180 degrees opposite of the tube opening. I learned the hard way... if a bug builds his nest in the tube, there is no other way to relieve tank pressure/vacuum when the valve is closed. You could wind up with a tank like mine... or worse... zero fuel flow when you need it.
That's real ugly Terry. Pretty hard to see in a short compact tube as this style of cap and this one does not have the hole at the 180 position. I take the caps off and blow through them to make sure they are open.
The cap is still available...$40.00 plus shipping.
That is fine. Please e-mail your details to: 94thaero (at) gmail and add the .com to the end of that. I will send you my info when you contact me. Thanks.
That is fine. Please e-mail your details to: 94thaero (at) gmail and add the .com to the end of that. I will send you my info when you contact me. Thanks.
Comment