Harer STC Availability

[barnstmr]

I want to buy a copy of the Harer STC. I have been unable to contact anyone at the phone # listed on the foundation website. - Does anyone have a new contact number?

Laz - didn't you recently obtain the STC? Who did you contact to purchase it?

[barnstmr]

Re: Harer STC Availability

Also - looking for C-90 parts or core engine and a 1B90CM7443 prop. Plan to use short mount and will apply for field approval to substitute C90 in place of C85.

[Forrest Barber]

Re: Harer STC Availability

Last Friday I got the method worked out to acquire the STC , I am calling her tomorrow. Trip back to PA should occur in next three weeks. I know no one has been famous for things they are going to do! I have rambled on about this in the past . I am trying to make it happen. I have an architect & engineer with scanners and the NY ACO is aboard. In the mean time, email me direct , I have five members on my list now!
[email protected] 330 823 0652 ( Winter number).

[GallagerG]

Re: Harer STC Availability

Hello Fellow T-Craft Owners,
I have a bit of a problem and I would really appreciate your expertise in this field. I have a 46 BC-12-D that was upgraded with the Harer STC in 1973. The aircraft was wrecked since then. All I have for paperwork is the 337. I’m looking for the drawings, or a complete list of what is supposed to be done with this STC.
I got the engine, a C-90-12F, rebuilt and I’m ready to put things back together, but, my mechanic and I are not convinced the STC was appropriately complied with,,, from the legal standpoint. IE: The fuel vent system. I have short vent lines from all three tanks, but none of them are hooked up according to a drawing I was able to find for the STC. I’m convinced the 12” engine mount is what the drawings called for, but I don’t know that for sure either.
Also the engine, according to the 337, was adjusted and rigged to be equivalent to the C-85. What did they do? I’m pretty sure I understand the reinforcements to the wings where the lift struts attach: Larger bushings attaching to the spars, and a plate welding them together. Maybe?
I fear when it was damaged things were not repaired properly and or things left off or out… ? Partly due to the poor work preformed.
It also came with 6X850 tires with no paperwork… does anyone have a 337 so I could get mine approved?
Looking forward to getting my bird in the air so I can fly before the spring is over!
Thanks so much,
Gallager B

[crispy critter]

Re: Harer STC Availability

I want to buy a copy of the Harer STC. I have been unable to contact anyone at the phone # listed on the foundation website. - Does anyone have a new contact number?

Laz - didn't you recently obtain the STC? Who did you contact to purchase it?

Terry,
I think you should already have a copy but if not I will be happy to send you a copy of my one time approval on Crispy.

[yoshman_g]

Re: Harer STC Availability

hello my name is josh i am in a similar boat i am looking to buy a copy of the harer stc for my bc-12d it will be in the homebuilt catagory here in canada anyway but is there any one to contact to buy a copy or get a photo copy of the drawings and such?