Announcement

Collapse
No announcement yet.

Looking for landing gear and parts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for landing gear and parts

    Hi!
    I'm a new guy to this forum, and any forum, actually, so please excuse any faux pas or breach of etiquette. I recently bought a BC12D that had torn loose from it's moorings in a wind storm. The landing gear is broken at the joints between the Vees and at both ends of the streamline tubing... does anybody have a left and/or right gear set? The wheels (Shinn, I believe, with the tapered axle) are also pretty well smashed: I need two outer halves and one inner half, if not two whole wheels... I have a lead on the brake parts needed, thanks to the parts suppliers listed on the website. Thanks for existing, folks... I hope I can become a contribution to the community.
    John O

  • #2
    Re: Looking for landing gear and parts

    John,
    If you don't have any luck finding the gear, you might call Tom O'Neil @ Wag Aero about haveing them repaired.Also if you need help with finding the wheels send me a PM and I can send you a list of sources to try.
    Good luck,
    Buell
    Last edited by Buell Powell; 03-07-2008, 06:53.
    Buell Powell TF#476
    1941 BC12-65 NC29748
    1946 Fairchild 24 NC81330

    Comment


    • #3
      Re: Looking for landing gear and parts

      I have a complete set of gear Left and right taper shaft with wheels and brakes that i will be selling.
      Tom
      316-992-5044

      Comment

      Working...
      X